On 3/17/14, 6:19 PM, KC wrote:
On 3/17/2014 6:01 PM, david@righthere... wrote:
I've been on 30A 120V power at the dock for years and would now like
to upgrade
to 50A 220V, or what they refer to as 50A 250V at the marina office. I
haven't
put a meter on it yet but so far suspect it's closer to 220 than 250.
The socket
on the pedestal is like the one pictured he

http://www.catagle.com/68-153/CWD_Ar...uyersGuide.htm

They say it's 3-pole 4-wire. I'm guessing X and Y are the two hot legs
and W is
the neutral. Between X or Y and W would be 120V+/- and between X and Y
is the
220/250V. Right? How does the ground tie into it though? With only 3
poles do we
run a separate wire from the boat to the pedestal, and if so how do we
tie in?

Also can anyone suggest the cheapest place to get a plug like that? So
far the
best price I've found is $68.18 he

http://www.ktool.net/servlet/the-581...-63CR65/Detail


Thank you for any help!
David


The plug is 10-20 bucks at home depot or lowes, Scottys whatever you
have. It's a dryer plug basically... As to the wiring, I forget but I
have a book I always use when I do the wiring.. It was about 20 bucks at
home depot, I have had it for as long as I have owned a house...


Yikes! It's NOT a dryer plug, basically or otherwise.