Can you explain *exactly* how this "protection" works?

-W

"Paul Dougherty" wrote in message
om...
Careful the prop is supposed to spin freely in one direction when the
selector is in forward. it protects the prop if you hit something.

Paul


(Brian Silver) wrote in message
. com...
Hi,

I am new to boating and screwed up my lower unit.
I think I stripped the gears because at one position the prop will
rotate
freely while in gear (forward).
I removed the 5 bolts below the anticavitation plate and the lower unit
has dropped an inch but is being held by the shifting linkage rod.
Am I looking for trouble or can I remove the lower unit easily.
I think the shifting rod can be freed up from under the carburator(s)
Would I then slide the whole rod out?
Would I mess up the shifting setup?
I have all winter to work on this and so far it has been interesting,
Thanks for the responses in advance,

Brian Silver, Little Long Lake, Ontario, Canada.