"LD" wrote in message ...
I would be happy to check except I am 370 miles away from it. (It's in
Pensacola and I'm in Atlanta. Your sketch however, doesn't look like my pin
outs. My 37 uses several sets of 2 or 4 from different plugs (for power,
temp, gps etc.).
LD

"emvsat" wrote in message
om...
"LD" wrote in message
. ..
My lit (for the Matrix 37, and probably all the Matrix models) is,
red=+12v;
black=ground; green=nmea in (connect to gps, nmea "out"). I'm puzzled
what
you would do with a laptop connected??
LD


"emvsat" wrote in message
om...
Hello

Can anyone help me with the pinouts for the connector of my Matrix 35
??

I want to connect my laptop to the fishfinder, and also my Garmin
eTrex GPS receiver. To do this I want to make my own cable.

Electronic schematic would also bee nice !!

With the laptop I want to download routes, waypoints and software
upgrades.

Can you use a multimeter and check on which pins the different colours
are connected to. The plug in back of the Matrix should have the
following pinouts:
|----|
| 0|1
|0 |2
| 0|3
|0 |4
| 0/5
|0 / 6
----

Can you measure for me please? I suppose that the +12V lead should not
be connected to my Garmin eTrex with 3V supply?

OL

OK.
Maybe I am wrong about the plug myselef. Matrix 37 and 35 should be
equal. I am away from my Matrix myself (oil rig in the North Sea). But
I will check it out when I come home.

OL