Subject: Remote battery for Lectrasan ?
From: Sven

There is a bracket under the v-berth on our new(old) Ericson 23, close
to the Lectrasan. It looks like it might be a battery bracket. Would it
make sense to have a battery there to satisfy the current draw of the
Lectrasan if the house batteries are some 15 feet away ?

Perhaps. But you still need to run a wire to that battery to charge it.


If it isn't a battery bracket I'm stumped what it is for.

Got me.


At this point I don't know if the Lectrasan is functional and I'm
wondering how to fire it up to see if it is ? Open the sea cocks (if
they are closed), pump, turn on the timer ... ? Or should I first do
some other preparation ?

Open sea cocks, pump some water through and fire it up. See if the lights go on
the timer box and listen for the two grinder motors to come on in sequence.
There is a way to check the plate but without the my LectraSan manual in front
of me I can tell you how.


I think the bottom of the bowl is at or under the DWL but none of the
plumbing has any antisiphon air gaps as far as I can tell. Do you need
air gaps if most of the bowl is above water ?

Not a bad idea.


The treatment tank is above the bowl. The manual (downloaded from
Raritan) states that the tank has to be below the bowl or you need to
call them. Why would it need to be below or what should I look for to
find out if it is acceptably installed despite being above the bowl ?
Are they just worried about backflow ?

Ask them. http://www.raritaneng.com/


Capt. Bill