Thread
:
shallow water idle vs plane draft requirements
View Single Post
#
3
Wayne.B
Posts: n/a
On 7 Apr 2005 09:59:23 -0700,
wrote:
I am still learning the limits of my Kenner V186 with Merc 90hp as far
as skinny water goes. Does anyone have a rough estimate as to the
difference in draft required between running on a plane and just simply
floating? How much shallower can I go if I go roaring thru an area vs
just trying to pole my way out. I don't have a jackplate.
==============================================
With the boat out of the water, measure from the lowest point of your
transom (stern), to the lowest point of your prop. Add in another 6
or 7 inches and that will be close to your minimum running depth when
on a full plane.
That said, if you REALLY want to run in shallow water, a jack plate is
the way to go. I'd also recommend carrying a spare prop and the tools
to change it.
Reply With Quote