Shortwave Sportfishing wrote:
Years ago I became interested in "cold molding" using the WEST system
of wood veneer over a base frame, sans core.

That's an excellent way to build a boat... or any other structure where
strength and high load cycle life span is desirable. Basically it's the
same thing ('laminated composite') as conventional fiberglass, only
substituting wood fibers & epoxy for glass fibers & polyester.


... A friend of mine back
then built a 32 foot Downeaster style boat using this method and it's
one hell of a boat - it's been through a lot and looks damn near new.


Sounds good... I bet it's been well taken care of, too.

He built a second boat - a 40 foot, full keel sailboat using some kind
of core material (I can't remember at the moment) again with the
veneer and WEST system resins and that boat has been used well and
it's a very solid boat - in fact, the only sail boat my wife will step
foot on.


I've only read about this kind of build method... sounds wierd to put a
foam core inside a wood laminate, but according to the texts it's very
strong stuff.

What really counts is the workmanship.

And the maintenance.

... I wouldn't have any problems
purchasing a Bluefin and they use chopper guns to bolster areas of
their hull - it's a great hull, well built and solid as a rock.

Maybe so, I've never seen a Bluefin that I know of, it could be a great
boat. But I stand by my statement that the only reason to use a chopper
gun is to save money... it's heavy & weak compared to any other sort of
lay-up. The good points are that it builds up quickly and has little or
no print-thru. A friend of mine who worked in a fiberglass shop making
shower stalls & bath tubs once made a 14' skiff with a chopper gun. It
weighed half a ton and flexed where you stepped. But it didn't cost
anything, it was made up of what would otherwise have been cleaned out
of the chopper gun and thrown away.

Fair Skies
Doug King