Al alternative would be a GEMS RotoFlow sensor for $100 and a M103 totalizer
readout for another $150. Try:
http://gemssensors.com/SpecTemplateS...uctGroupID=117 for the
readout and
http://gemssensors.com/SpecTemplateS...uctGroupID=113 for the
paddle wheel sensors. You can buy them on line at the site.

--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com

"Glenn Ashmore" wrote in message
news:Btaqg.115627$Ce1.5896@dukeread01...
The Signet 8150-P totalizer is probably what you saw but that baby cost
$450 just for the readout. The 515 sensor is another $250.

I built my own from a GEMS RotoFlow sensor, a PIC microprocessor and about
$1,000 in after hours programming time. :-)

--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com

"b393capt" wrote in message
ups.com...
Where can I find a water meter with a remote display, to measure my
fresh water usage at a connection near my manifold or water pump, and
display 10 feet away ? Just need to see cumlative usage in gallons,
and have a reset button each time I fill the tank.

When I was in St. Martin I saw a digital water use meter in a Lagoon
4100, and was surprised how hard it is to find on the web sites

Dan