A picture speaks 1000 words so here is a link to our industry with
pictures.
http://www.confederationcove.com/ima...bum.cfm?aid=13
As the mussel "socks" grow they become heavier and eventually will
touch bottom were predators such as starfish begin to eat the mussels.
We like to keep the socks approx. 1' off bottom, this means either
picking up the socks and looking for starfish, diving or using an
accurate sounder. The sounders I mention are able to run either 50 or
200khz, does this mean a dual frequency transducer should be available
or do I have to choose 50 or 200?
On Feb 23, 12:46 pm, Short Wave Sportfishing
wrote:
mark wrote:
I am going to buy a sounder for use in my aquaculture operation. I
need it to be as accurate as possible in determining if my mussel
socks are touching the bottom or are 1' off the bottom. The water is
only 20 feet deep and it is a mud bottom. Some people are using SiTex
106-L which has 300 watts of power and 50 or 200KHz and some are using
Furuno FCV 620 which has 600 watts of power and I saw one with a
Hondex. For my application is there any advantage of one over the
other? Also My boat is aluminum and some dealers are telling me to use
a bronze transducer but make sure it is isolated with plastic bushing
and other are saying use a special ordered aluminum transducer. And
finally would it be most accurate if it pointed straight down or would
having it 10 degrees off to one side (flat against the hull) make a
big difference, if so could I fabricate a level flat spot on the hull
to mount it to but would this create to much turbulence for it to read
properly? I want it as far forward as possible not on the stern. Thanks
What I know about shell fishing you could write on the head of a hat pin
but I'm wondering why you need to use a depth finder to find the bottom?
If you need that kind of accuracy, why not use a sounding lead and line?
To answer your angle question, shooting straight down is the best way to
find the bottom. At that wattage, 300 would be more than sufficient,
but you need to use a 50 Khz transducer as 200 Khz would shoot right
through the bottom.
I'm also curious about something else. As I've seen in other mussel
operations, you usually have a frame from which the strings hang. I
understand this to be standard practice because of the depth control and
the ability to harvest quickly.
What is the nature of your operation that requires a boat with a depth
sounder?- Hide quoted text -
- Show quoted text -