On Mar 29, 4:57 pm, "WBH" wrote:
"rlojmo" wrote in message
ups.com...
On Mar 28, 11:18 pm, "WBH" wrote: "rlojmo" wrote in message
roups.com...
On Mar 28, 7:13 pm, "WBH" wrote: There is an
option available for the Brookhouse NMEA multiplexer, that
allows testing of any NMEA data value and user-control of 4 signals
that
can switch a lights (leds), buzzers or relays.
The following is an excerpt from the documentation:
ยท Testing of NMEA parameter values and setting or clearing of
externally available control signals. The control signals can be used
for
warning lights, alarm buzzers or to drive relays to switch lights or
equipment on/off. There are 4 signals available. NMEA parameter
conditions
that can be tested a (Greater than), (Smaller than) and = (Equal).
Signals can be turned on or
off if the condition is "true".
The complete document is
hehttp://www.brookhouseonline.com/pdf%...ering%20and%20..
.
If your Raymarine plotter is a C-series or E-series, you may want to
have
a
look at this:http://brookhouseonline.com/pdf%20files/Mux_AIS_C.pdf
Wout
"rlojmo" wrote in message
roups.com...
Does anyone have a commercial solution for getting an alram out of the
raymaine chartplotters that can actually be heard. I know they sell
the seatlk to nema converter for this purpose, but I am told this will
not sound an alrm for anchor dragging. I bought the shipmodul
multiplxer but unfortunately this does not have switched outputs. Is
there a nema alarm sentence from the raymarine char plotter?
Bob
How do I access the 4 signals, I thought it only had RS-232 for the
output/
No, Brookhouse mux outputs are RS232, RS422, 2nd RS422 @4800
(speedconversion of AIS-C and AIS models), USB (optional). If the control
signal option is ordered, a separate 10" multi-core cable is brought out
the
mux enclosure with a led already connected to output 1 for practicing the
*C
directive. It is intended for the more technically oriented.
You will find more he
http://www.brookhouseonline.com/pdf%...20controlled%2...
Wout
Thanks a lot for the information.
Unfortunately I ordered mine from Captn Jack's, I didn't know about
the signal option. Any chance I could solder those wires on myself?
Bob
Are you sure you have a Brookhouse multiplexer? You started this thread
saying you had a Miniplex.
Wout
What I have is shown at the link below:
http://www.capjack.com/category/Mari...-Bluetooth.cfm
Bob