I appreciate the way you have explained the world of epoxies.


"Paul Oman" wrote in message
k.net...
wrote:

On Jun 13, 6:33 pm, "mscres" wrote:

I saw a low priced epoxy from US Composites. Anyone please give me some
opinion about this epoxy product? Is this product comparable in quality
with
expensive WEST system?

Thanks,
sixfoot_flat


There is a guy active here, Paul Oman at epoxyproducts.com who seems
to know his stuff. I have dealt with Larry at raka.com, had very good
experience there myself.


--------------
thanks for the nice lead in.
I have an entire web page that explains the differences in epoxies
(www.epoxyproducts.com/mepoxies.html )
but in a nutshell.....


The cheap vendors use simply repackage the correct resin and curing agent
from the big chemical companies that make them.

The companies like System 3, Progressive Epoxy, MAS, etc. start with those
products but then adjust them with additives, blends of curing agents
(there are about 60 different curing agents) to create properties they
want (like I to think they are good properties, but probably certainly
some of those 'fixes' are to cheapen the product and thus make more
profit).

For example, 1 to 1 or 2 to 1 or 3 to 1 mixes are easier to use (and may
be easier to formulate) but the curing agents are the expensive part so
more profit if the ratio uses less curing agent (say a 6 to 1 mix). Lots
of ways to make non-blushing epoxies, but those chemicals cost more - so
when profit is more important than customer satisfaction, the market gets
epoxies that blush...... barrier coats (epoxy paints) that need 6 coats,
etc.

For a small company a formulated marine epoxy probably cost $25 - $35 per
gallon to make. For the big volume vendors probably under $20 per gallon.
A stocking distributor might will demand a 60% discount over the list
price so the formulator , if he uses distributors, has to really mark up
the price so that he can still make a profit after discounting (plus pay
for 800 numbers, color brochures, trade shows) etc. The epoxy makers that
don't have any distributors probably don't mark up their products enough
to interest a distributor - that's win-win for everyone except potential
distributors.


Also note the marine/boatbuilding is not a challenging application for
epoxies, hence so many brands, prices, etc. (they all get the job done,
more like comparing apples to apples instead of apples to oranges).

A lot of marine coatings/resins seem to find their way into boating
circles after they have become outdated in the industrial/commercial
marketplace - jack up the price and squeeze a few more million $ from a
product no commercial contractor wants to buy any more. Example,
induction time (mix up an epoxy and you have to let it 'sit' for some
amount of time) - very rare in commercial epoxies - still common with many
'marine epoxy paints'. Sad....


- that's the skinny/insider info on epoxies. - Don't think you would get
this kind of info from anyone else.

paul oman
progressive epoxy polymers inc
www.epoxyproducts.com/marine.html