BoatBanter.com - View Single Post

Jonathan Ganz

In article ,
Vic Smith wrote:
On Fri, 04 Jul 2008 12:05:06 -0500, lid (Jonathan
Ganz) wrote:

In article ,
richard wrote:
Happy 4th of July. For the first time in almost 20 years, I will not
be on the Charles River in Boston to see the fireworks. My boat is in
the shop. Here is what happened. Several weeks ago, while I was
putting around the harbor, the engine started sucking in salt water. I
got towed in and had my mechanic/shop, which I have used since I owned
the boat, look at the boat right away. Compression check revealed all
cylinders were OK. They hauled the 1993 25ft four winns out and
cleaned out the gunk. 2 weeks later, the told me I needed to replace
both the risers and manifolds. Which they did. They tested the boat
yesterday to discover that they had been wrong. it was not the risers
or manifolds and now we are back at square one. My question is: What
does the boat owner pay for and what does the shop have to eat in this
situation. Should I pay for the new risers and manifolds? The mechanic
says they can put the old ones back. This boat is old and we do not
want to put more money into it than we have to. Keeping in mind that
we are not able to do any of the work ourselves, what would you do?

I've had similar situations happen over the years with cars, but I think the same principle
applies. The yard should do the labor for free, but the parts should probably be yours. If
they are able to replace the new parts with the old without degrading the over all
condition, then I would have them do that. You should pay for the new parts but not the
labor, since you were inconvenienced. I would take the attitude of trying to work it out so
no one feels screwed over. If they want your business and your friends' business going
forward, then they'll be willing to work with you. Mistakes happen, and neither party should
have to pay through the nose.

I guess you're unaware of it, but your posts aren't wrapping lines.
Or should I say "line?"

Thanks for reminding me... I'm using an old-style shell-based and I keep
forgetting to press return.

J