I installed the Balmar 612 regulator and selected the P03 - Gel
battery program which has a bulk voltage of 14.1. Need to set the bulk
at 14.4 as I use Sonnenschein Gel batteries. Went into the advanced
settings and adjusted bulk (Bu) to 14.4 but the regulator still
regulates at the 14.1 setting.
Also the actual float voltage is 13.4 even though the P03 setting is
13.7
Have emailed Balmar who said it is operating normally???
Am I missing something on the programming or is the regulator faulty.

Tony