-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On 09 Oct 2003 00:22:24 GMT,
WestlakeY wrote:
If you don't want or can't pull the wires. Run a snake through than
pull a messenger with foam blocks tied every few feet for the length
of the spar.


The foam blocks work ok, but the *next* guy who wants to run new or
another wire there, has to deal with old, decaying urethane foam bits.
It's a real pain. I used the zip tie method recently, it has it's own
problems, but it doesn't rattle a bit. the pvc conduit is the best way,
as well as the most work. You can also run it up outside the mast if you
are careful wrt routing, but some folks don't care for the cosmetic
issues, and you still have to figure out how to keep the cable(s) snug
to the mast.

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (GNU/Linux)

iD8DBQE/iOh4d90bcYOAWPYRAil+AKDrzDd1Duyw4PuypMQoGxQ13AmZDg Cg1dMg
WFXNPATeVYpahHwrL3ZjE8c=
=PIi1
-----END PGP SIGNATURE-----

--
Jim Richardson http://www.eskimo.com/~warlock
I have plenty of talent and vision. I just don't give a
damn.