I'm building 36' fiberglass Spray by Roberts Bruce.
Currently I'm working on deck and cabin top.
My plan says that deck and top cabin supposed to be sandwich method
(2CSM+18WR+2CSM+5/8"Balsa+2CSM+18WR+2CSM). Side cabin it is 6 layers of
fiberglass solid.
I did changes to this schedule. I built deck using 0.75" marine plywood and
side cabin 0.75" marine plywood as well. I make this decision because I want
to put any hardware on deck wherever I want.
I did ask Bruce about new fiberglass schedule over the plywood but
unfortunately I didn't get clear answer because it is against his
recommendation.
I'm planning to cover the plywood by 2 layers of 18WR mostly because I have
a lot of left over.
On cabin top I'm going to keep sandwich method.
Any suggestion about fiberglass schedule over 0.75" plywood deck?
Thanks for any help in advance.
Adam
For direct e-mail use

My deck, cabin side and cabin top are of 2 layers of 1/2" ply and I glassed
mine using a fab-mat that had a chopped strand on the face of the roving.

I would recommend that you lay a layer of CSM at the same time you lay your
18WR as a binder. Much the same as when you doing a glass lay up. The 18WR
being rather course weave.


--
My opinion and experience. FWIW

Steve
s/v Good Intentions (Ingrid 38)

Thanks Steve - Actually I got this idea from your website and your pictures.
Scotty - you are absolutely right. I'm getting this problem many times.
OK - here you a
CSM - Chopped Strand Mat
2CSM it is 2 oz per square foot
WR - Woven Roving
18WR it is 18 oz per square yard
How it looks? - take a look here i.e.
http://www.noahsmarine.com/Canada/Fi...glass-can.html
BTW it is my supplier - for my project.
Thanks
Adam

"Adam" wrote in message ...
Thanks Steve - Actually I got this idea from your website and your pictures.
Scotty - you are absolutely right. I'm getting this problem many times.
OK - here you a
CSM - Chopped Strand Mat
2CSM it is 2 oz per square foot
WR - Woven Roving
18WR it is 18 oz per square yard
How it looks? - take a look here i.e.
http://www.noahsmarine.com/Canada/Fi...glass-can.html
BTW it is my supplier - for my project.
Thanks
Adam
Thanks Adam, I appreciate being answered without the attitude of the OG...
Scotty