What's your favorite diesel-resistant gasket sealant? This is for the
nitrile gasket on a clean-out port on the top of a small diesel fuel tank. I
wouldn't mind something that worked well for pipe threads, too.

Thanks,
Tom Dacon

On Oct 3, 8:19*pm, "Tom Dacon" wrote:
What's your favorite diesel-resistant gasket sealant? This is for the
nitrile gasket on a clean-out port on the top of a small diesel fuel tank.. I
wouldn't mind something that worked well for pipe threads, too.

Thanks,
Tom Dacon

Most common replacement for nitrile/BUNA/Neoprene is EPDM or
EthylenePropyleneDiamineMonomer .... if you cant find EPDM then plain
EthylenePropylene (EPR) will do.

On Sat, 3 Oct 2009 17:19:31 -0700, "Tom Dacon"
wrote:

What's your favorite diesel-resistant gasket sealant? This is for the
nitrile gasket on a clean-out port on the top of a small diesel fuel tank. I
wouldn't mind something that worked well for pipe threads, too.

Thanks,
Tom Dacon

For threaded fittings get the LokTite catalog as they have just about
every sealant that you will ever want :-)

Cheers,

Bruce
(bruceinbangkokatgmaildotcom)

"Bruce In Bangkok" wrote in message
...
For threaded fittings get the LokTite catalog as they have just about
every sealant that you will ever want :-)

MOST threaded fittings don't use a gasket, so your answer is a non-sequitor.


Cheers,

Drunk again?

"Jenny" wrote in message ...

"Bruce In Bangkok" wrote in message
...
For threaded fittings get the LokTite catalog as they have just about
every sealant that you will ever want :-)

MOST threaded fittings don't use a gasket, so your answer is a
non-sequitor.


Cheers,

Drunk again?


That you Wilburrrr?

"mmc" wrote in message
g.com...

"Jenny" wrote in message ...

"Bruce In Bangkok" wrote in message
...
For threaded fittings get the LokTite catalog as they have just about
every sealant that you will ever want :-)

MOST threaded fittings don't use a gasket, so your answer is a
non-sequitor.


Cheers,

Drunk again?


That you Wilburrrr?

no

"Jenny" wrote in message ...

"mmc" wrote in message
g.com...

"Jenny" wrote in message ...

"Bruce In Bangkok" wrote in message
...
For threaded fittings get the LokTite catalog as they have just about
every sealant that you will ever want :-)

MOST threaded fittings don't use a gasket, so your answer is a
non-sequitor.


Cheers,

Drunk again?


That you Wilburrrr?

no

Capt Kneel?

On Sun, 4 Oct 2009 08:40:00 -0400, "Jenny" wrote:


"Bruce In Bangkok" wrote in message
.. .
For threaded fittings get the LokTite catalog as they have just about
every sealant that you will ever want :-)

MOST threaded fittings don't use a gasket, so your answer is a non-sequitor.


Cheers,

Drunk again?


Possible you need remedial reading lessons as the original poster
wrote ". I
wouldn't mind something that worked well for pipe threads, too."


Cheers,

Bruce
(bruceinbangkokatgmaildotcom)

On Sun, 4 Oct 2009 08:40:00 -0400, "Jenny" wrote:

"Bruce In Bangkok" aka "Goebbels in Bangkok" farted in .. .
For threaded fittings get the LokTite catalog as they have just about
every sealant that you will ever want :-)

MOST threaded fittings don't use a gasket, so your answer is a non-sequitor.


Cheers,

Drunk again?

Well, it could have been an occupation illness but in the present
case, it's only a severe case of Alzheimer disease

;-)
Sigmund Mort
"In fact the real news in Pattaya was the arrival of the U.S. Navy and
the anticipated "invasion" of the sailors - each of which, the T.V.
announced, would have a minimum of US$ 200 a day to finance their
activities. It is one thing to sit under a French coconut shell
watching Fox News and quite a different thing being here, in Thailand,
seeing what actually happens." the boozy troll... less than 24 hours
before the Thai PM declares a State Of Emergency.

Tom Dacon wrote:
What's your favorite diesel-resistant gasket sealant?
This is for the nitrile gasket on a clean-out port on the top of
a small diesel fuel tank.
I wouldn't mind something that worked well for pipe threads, too.

Thanks,
Tom Dacon

Tom,
Why do you think it needs a sealant in addition to the gasket.
If you are having a distinct problem with the assembly,
there may be some other issue here.
Matt