I got a Coleman PMP 2000 inverter, mounted it to the
rear wall of the hull on a houseboat, and hooked it
to the batteries. It ran a drill for a few trys, so I figured
things were good. I took the boat out, and the next
day tried using the inverter. It wouldn't run anything,
but the green power light stayed on. I thought that
maybe the vibration of the wall it was mounted to
while the engine was running could be enough to
damage it, but I went and felt it with the engine
running and it doesn't seem like much vibration to
me...not that it should be enough to damage the
inverter. The vibration of the wall of a truck or
camper would probably be a lot worse, but I'm
wondering what other people might think about it.

:

I got a Coleman PMP 2000 inverter, mounted it to the
rear wall of the hull on a houseboat, and hooked it
to the batteries. It ran a drill for a few trys, so I figured
things were good. I took the boat out, and the next
day tried using the inverter. It wouldn't run anything,
but the green power light stayed on. I thought that
maybe the vibration of the wall it was mounted to
while the engine was running could be enough to
damage it, but I went and felt it with the engine
running and it doesn't seem like much vibration to
me...not that it should be enough to damage the
inverter. The vibration of the wall of a truck or
camper would probably be a lot worse, but I'm
wondering what other people might think about it.

Drills are very noisy in the EMP and back-voltage - It is possible that high
voltage spikes from the drill damaged your inverter. You need a line filter
between the drill and the inverter in the future.

Earl Colby Pottinger

--
I make public email sent to me! Hydrogen Peroxide Rockets, OpenBeos,
SerialTransfer 3.0, RAMDISK, BoatBuilding, DIY TabletPC. What happened to
the time? http://webhome.idirect.com/~earlcp

Subject: inverter vibration damage???
From: Earl Colby Pottinger

I make public email sent to me!

Why?

Capt. Bill

(LaBomba182) :

Subject: inverter vibration damage???
From: Earl Colby Pottinger

I make public email sent to me!

Why?

Capt. Bill

Because I get into agruements where people send me the worse type of email
messages possible, while in the public forums they try to pretend to be sweet
and nice. The idea is to have me blow my top and either say things I should
not or if I try posting thier email to defend myself I am breaking the
unwritten rule that emails are assumed to be private.

In my case I don't let people attack me and then hid behind that unwritten
rule.

If you need examples use Google to look at the messages in sci.astro from
1995 to 2003 and checkout the attacks from the Zetadrones. Using email to
bad mouth a person then jumping all over them if they revealed the email was
standard for them. Basicly I live as open a life as possible, this makes it
very hard make false claims about me that people will believe.

Earl Colby Pottinger


--
I make public email sent to me! Hydrogen Peroxide Rockets, OpenBeos,
SerialTransfer 3.0, RAMDISK, BoatBuilding, DIY TabletPC. What happened to
the time? http://webhome.idirect.com/~earlcp

Earl Colby Pottinger wrote in message ...

Drills are very noisy in the EMP and back-voltage - It is possible that high
voltage spikes from the drill damaged your inverter. You need a line filter
between the drill and the inverter in the future.

Imaginative cukka. This didn't hurt your Coleman MSW inverter,
something it wrong with it or there is an open in your related circuit
(fuse, breaker or connection). These cheap inverters (they are all
about the same) will stand up to a fair amount of abuse. No wonder
some people send this guy criticla emails...