Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Jerry W
 
Posts: n/a
Default Navico TP 5500 problem..help!

My tillerpilot is working basackwards, i.e. if the boat goes off course to
STBD, the correction is for more STBD. I've lost the manual and am hoping
some kind soul can tell me how to reprogram it. I seem to recall that when
it was new I keyed in something to tell it which side of the tiller it was
mounted on. It and I seem to have lost our memory. Can any one help...
please. And for bonus points, can anyone direct me to an online, free source
to download the manual.
Thanks.


  #2   Report Post  
Brian Whatcott
 
Posts: n/a
Default

On Sat, 25 Jun 2005 15:40:35 -0700, "Jerry W"
wrote:

My tillerpilot is working basackwards, i.e. if the boat goes off course to
STBD, the correction is for more STBD. I've lost the manual and am hoping
some kind soul can tell me how to reprogram it. I seem to recall that when
it was new I keyed in something to tell it which side of the tiller it was
mounted on. It and I seem to have lost our memory. Can any one help...
please. And for bonus points, can anyone direct me to an online, free source
to download the manual.
Thanks.


TP-5500 Navico TillerPilot Owners Manual Manual (20 pages), $14.95.
....

http://www.marineelectronicshoppe.com/manuals/Simrad/Autopilots.htm

Brian Whatcott Altus OK
  #3   Report Post  
Matt Colie
 
Posts: n/a
Default

Jerry,
Navico is now part of Simrad. I do not know how good there coverage is
of older numbers.
Matt Colie

Jerry W wrote:

My tillerpilot is working basackwards, i.e. if the boat goes off course to
STBD, the correction is for more STBD. I've lost the manual and am hoping
some kind soul can tell me how to reprogram it. I seem to recall that when
it was new I keyed in something to tell it which side of the tiller it was
mounted on. It and I seem to have lost our memory. Can any one help...
please. And for bonus points, can anyone direct me to an online, free source
to download the manual.
Thanks.


  #4   Report Post  
Me
 
Posts: n/a
Default

In article ,
"Jerry W" wrote:

My tillerpilot is working basackwards, i.e. if the boat goes off course to
STBD, the correction is for more STBD. I've lost the manual and am hoping
some kind soul can tell me how to reprogram it. I seem to recall that when
it was new I keyed in something to tell it which side of the tiller it was
mounted on. It and I seem to have lost our memory. Can any one help...
please. And for bonus points, can anyone direct me to an online, free source
to download the manual.
Thanks.



why not just reverse the drive power and call it a day.....


Me
  #5   Report Post  
Armond Perretta
 
Posts: n/a
Default

Jerry W wrote:
My tillerpilot is working basackwards, i.e. if the boat goes off
course to STBD, the correction is for more STBD. I've lost the manual
and am hoping some kind soul can tell me how to reprogram it. I seem
to recall that when it was new I keyed in something to tell it which
side of the tiller it was mounted on. It and I seem to have lost our
memory. Can any one help... please. And for bonus points, can anyone
direct me to an online, free source to download the manual.
Thanks.


I just dug out the manuals for the TP5000/TP5500 and the HP5000 remote. Let
me see what's in there about reversing the pilot direction.

Hmmmm. I scanned the appropriate page and "OCR'd" the text, There are a
few diagrams on the page that complicate the OCR, but here's what it says
(approximately:

PAGE 16

PORTHAND MOUNTING

The Tillerpilot is factory set for mounting on the starboard side. If you
require port hand mounting then the unit can be reconfigured by following
the procedure below. You will only need to do this once as the setting will
be memorized by the unit and retained even after disconnection from the
power supply.

CHANGING MOUNTING CONFIGURATION OF TILLER PILOT.

Hold down the setlauto key and connect Tillerpilot to 12 Volts (ensure key
is held down before and during power connection). Wind indicator confirms
Tillerpilot set for starboard mounting (note: if port hand
mounting had previously been set, then compass indicator would confirm).

Press the port key if port hand mounting Compass indicator confirms
Tillerpilot now set for port hand mounting.

Press the starboard key only if starboard mounting is to be reselected. Wind
indicator will confirm.

When correct mounting has been selected press set/auto to revert the
Tillerpilot to normal operation - standby-mode, compass selected.

END

Send certified check for $1000 to my PayPal account.

--
Good luck and good sailing.
s/v Kerry Deare of Barnegat
http://home.comcast.net/~kerrydeare






  #6   Report Post  
Jerry
 
Posts: n/a
Default

Check is in the mail! Thanks for your help.

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Johnson outboard problem Garland Gray II Cruising 4 July 13th 10 03:48 PM
Cavitation problem Claude Bolduc General 1 July 14th 04 05:35 PM
Math Problem SkitchNYC ASA 102 March 5th 04 01:43 AM
back with a problem now Nancy General 14 August 2nd 03 05:43 AM


All times are GMT +1. The time now is 03:45 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017