http://www.friend.ly.net/~dadadata/s...n_sail_00.html

H. WARINGTON SMYTH
MAST & SAIL IN EUROPE AND ASIA 1906 EBOOK

http://www.diam.unige.it/~irro/lecture_e.html
IRROTATIONAL FLOW OF AN INVISCID FLUID

http://conan.dt.navy.mil/reports/viscous/

Viscous Drag Calculations For Ship Hull Geometry
1. Abstract
2. Introduction
3. Axisymmetric Body of Revolution
1. Geometry
2. Grid Parameters
4. Surface Ship Hullform
5. Multi-Zonal Flow Solver
6. Results and Analysis
1. Axisymmetric Body of Revolution
1. Without Angle of Attack
2. With Angle of Attack
3. Effect of Grid Parameters
2. Surface Ship
7. Conclusions
8. References


http://johnrsweet.com/Mold.html
"This is a brief description of the steps involved in making a simple
fiberglass mold, preparing it for use, and maintaining it in good
condition. I will stick strictly to the KISS principle. This method is
suitable for a backyard builder or small fiberglass shop. It will
produce a mold that should last for a hundred or more parts if handled
carefully. Professional molds for industrial production are much more
complex and many times more expensive."
Page Index | Plug Preparation | Mold Construction | Finishing &
Break-in | Mold Maintenance

http://www.specialchem4adhesives.com...ex.aspxArticle of
the week

Nov 23, 2005 - Formulating RTV Silicone Sealants
Silicone polymers display an exceptionally wide range of chemistries
and physical properties. These polymers can be low viscosity liquids,
crosslinkable elastomers, or hard solids. Adhesives and sealants
represent only one major class of commercial silicone products. These
versatile materials were introduced approximately 30 years ago and
many of the original formulations are still utilized.

http://rb.sekli.hu/text/articles/Und...ent%20Wind.htm

Understanding Apparent Wind

http://rb.sekli.hu/text/articles.html

LINKS PAGE

Fair winds Mic