![]() |
Ketch Rig with Windvane
Anyone have any eperience using a ketch rig with a Monitor or some
other windvane? I would like to get a windvane for my Shannon 39, but locals inform me that I may experience problems - I am highly skepticle about the assertion. |
Ketch Rig with Windvane
Cindy wrote: Anyone have any eperience using a ketch rig with a Monitor or some other windvane? I have an old Sail-O-Mat on my 32 foot Seawind ketch which has steered the boat for about 25,000 offshore miles so far. It steers better than the autopilot. There are two issues to think about: 1) Tacking and gybing: the mizzen boom will hit the vane. I either remove the vane (the wind sensor part) before the tack, or raise the boom high with the topping lift before tacking. At sea I keep a fore-guy on the mizzen boom in case of an accidental gybe or tack. I also keep a fore-guy rigged on the main boom, at sea, as well, for safety reasons. 2) Close hauled the down-draft from the mizzen sail can effect steering. Sometimes I just leave the sheet a little loose. Jack |
All times are GMT +1. The time now is 07:52 PM. |
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com