I have encountered a "Goat Rodeo" trying to interface the Nauticast-B
along with the Actisense NDC-4 to the Raymarine E120.

Things work on my laptop, wired direct thru the serial port. On the
E120, nothing... seems it's not getting VDM and VDO nmea sentences.
The baud rate is set at 38400 on E120.

Anyone have any ideas as to what is wrong?

Thanks in advance...

Capt. Hank

"Capt. Hank \"At Last\"" wrote in news:ed2beef2-
:

I have encountered a "Goat Rodeo" trying to interface the Nauticast-B
along with the Actisense NDC-4 to the Raymarine E120.

Things work on my laptop, wired direct thru the serial port. On the
E120, nothing... seems it's not getting VDM and VDO nmea sentences.
The baud rate is set at 38400 on E120.

Anyone have any ideas as to what is wrong?

Thanks in advance...

Capt. Hank


Try running everything at 4800 baud....You don't need that kind of speed.

--
-----
Larry
You can tell there's very intelligent life in the Universe
because none of them have ever tried to contact us.....

"Capt. Hank "At Last"" wrote in message
...
| I have encountered a "Goat Rodeo" trying to interface the Nauticast-B
| along with the Actisense NDC-4 to the Raymarine E120.
|
| Things work on my laptop, wired direct thru the serial port. On the
| E120, nothing... seems it's not getting VDM and VDO nmea sentences.
| The baud rate is set at 38400 on E120.
|
| Anyone have any ideas as to what is wrong?
|
| Thanks in advance...
|
| Capt. Hank

The wrong multiplexer. There are multiplexers especially suited for this
kind of application, that can handle the signal level of the Nauticast B at
38400. Google NMEA multiplexer AIS.
WBH