| Home |
| Search |
| Today's Posts |
|
#1
|
|||
|
|||
Reducing speed of DC pump
My Jabsco toilet pump needs to be slowed down, what is the simplest
way to reduce speed, by voltage? It also is very noisy, hopefully reduced speed will quiet it down too. Dave Silver Belle |
|
#2
|
|||
|
|||
|
Reducing speed of DC pump
Why does it need to be slowed down?
Doug s/v Callista "David Brooks" wrote in message om... My Jabsco toilet pump needs to be slowed down, what is the simplest way to reduce speed, by voltage? It also is very noisy, hopefully reduced speed will quiet it down too. Dave Silver Belle |
|
#3
|
|||
|
|||
|
Reducing speed of DC pump
On 5 Mar 2004 14:51:35 -0800, (David Brooks)
wrote: My Jabsco toilet pump needs to be slowed down, what is the simplest way to reduce speed, by voltage? It also is very noisy, hopefully reduced speed will quiet it down too. Dave Silver Belle http://www.solorb.com/elect/pwm/ http://electronickits.com/kit/complete/motor/ck1400.htm $20 up to 100V at 5A But, here's the SAME kit for $12 http://www.web-tronics.com/dcmotspeedco.html http://www.aaroncake.net/circuits/motorcon.htm http://www.qkits.com/serv/qkits/diy/pages/FK804.asp $12 Canadian (What's that $US5?) http://www.elecdesign.com/Files/29/5763/Figure_01.gif And, for you meter freaks: http://www.velmex.com/motor_speed_controls.html Larry W4CSC POWER is our friend! |
|
#4
|
|||
|
|||
|
Reducing speed of DC pump
Motor impeller forms air lock, have to wait for incoming water to
catch up, using shortest run with ID tubing to match pump. "Doug Dotson" wrote in message ... Why does it need to be slowed down? Doug s/v Callista "David Brooks" wrote in message om... My Jabsco toilet pump needs to be slowed down, what is the simplest way to reduce speed, by voltage? It also is very noisy, hopefully reduced speed will quiet it down too. Dave Silver Belle |
|
#5
|
|||
|
|||
|
Reducing speed of DC pump
If you have a filter on the inlet side it is probably too restrictive.
Regards Gary On 5 Mar 2004 19:44:06 -0800, (David Brooks) wrote: Motor impeller forms air lock, have to wait for incoming water to catch up, using shortest run with ID tubing to match pump. "Doug Dotson" wrote in message ... Why does it need to be slowed down? Doug s/v Callista "David Brooks" wrote in message om... My Jabsco toilet pump needs to be slowed down, what is the simplest way to reduce speed, by voltage? It also is very noisy, hopefully reduced speed will quiet it down too. Dave Silver Belle |
|
#6
|
|||
|
|||
|
Reducing speed of DC pump
You are right I do have a strainer, it keeps the eel grass and other
small stuff out of the head, in the past without a strainer, I found grasses coming out of the head openings and odor from when they decompose. The strainer has same in and out ID with only a screen between. Gary Schafer wrote in message . .. If you have a filter on the inlet side it is probably too restrictive. Regards Gary On 5 Mar 2004 19:44:06 -0800, (David Brooks) wrote: Motor impeller forms air lock, have to wait for incoming water to catch up, using shortest run with ID tubing to match pump. "Doug Dotson" wrote in message ... Why does it need to be slowed down? Doug s/v Callista "David Brooks" wrote in message om... My Jabsco toilet pump needs to be slowed down, what is the simplest way to reduce speed, by voltage? It also is very noisy, hopefully reduced speed will quiet it down too. Dave Silver Belle |
|
#8
|
|||
|
|||
|
Reducing speed of DC pump
|
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Problem water pump Yanmar 2GM *Redux* | Cruising | |||
| Bilge Pump Switch | Cruising | |||
| Pump RUNNING Indication | Electronics | |||
| Can Tow from Florida to Northeast for $$ | General | |||
Linear Mode
