LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Donagh
 
Posts: n/a
Default Autopilot fails on Raytheon ST5000+ with "No Data" error

Hello, I have a 38ft (11.5m) sailing cruiser with a Raytheon ST5000+
autopilot, Raytheon radar/chart plotter with Wind, Depth, Speed, GPS,
fluxgate compass, etc.
The autopilot works only when travelning west. Attempting to calibrate
the system always fails at the "Turn Boat" phase with a "Too Fast"
error even thou I've done the turn dozens of times exactly by the
book. The ST5000+ compass heading is wildly inaccurate. As the boat
turns the ST5000+ compass display jumps in large increments rather
than smoothly as I would expect.
Tying the autopilot in any direction other than West results in a
change of direction or a "No Data" error.
Any ideas?

Many thanks, Donagh.
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Autopilot fails on Raytheon ST5000+ with "No Data" error Donagh Cruising 6 June 12th 04 05:01 PM
Furuno 1721 MKII Compass input?? (long) Steve Electronics 3 January 13th 04 02:50 AM


All times are GMT +1. The time now is 08:08 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017