Hi Chaps!
Can anyone help?.

On the back of the starter switch there are 5 connections, 2 of which
are double and 1 single. The connections are numbered 1,2 and 3.
Number 1 spade connection is the single one. Numbers 2 and 3 have
double spade end connections on them.
Am I right in assuming that the single connection( number 1)is for a
live feed from the battery?. If so, what wires go from the other
connections on the back of the switch ( numbers 2 and 3), and to
where?.
Hope I`ve made it clear enough!.
Regards
Martin

On 20 Aug 2004 13:17:12 -0700, wrote:

Hi Chaps!
Can anyone help?.

On the back of the starter switch there are 5 connections, 2 of which
are double and 1 single. The connections are numbered 1,2 and 3.
Number 1 spade connection is the single one. Numbers 2 and 3 have
double spade end connections on them.
Am I right in assuming that the single connection( number 1)is for a
live feed from the battery?. If so, what wires go from the other
connections on the back of the switch ( numbers 2 and 3), and to
where?.
Hope I`ve made it clear enough!.
Regards
Martin

The quick and easy way to solve this problem is to use an ohmmeter or
continuity checker (even a battery and light bulb) to check for
continuity between the various terminals in each position of the
switch.



--
Peter Bennett VE7CEI
email: peterbb4 (at) interchange.ubc.ca
GPS and NMEA info and programs: http://vancouver-webpages.com/peter/index.html
Newsgroup new user info: http://vancouver-webpages.com/nnq

Peter Bennett wrote in message . ..
On 20 Aug 2004 13:17:12 -0700, wrote:

Hi Chaps!
Can anyone help?.

On the back of the starter switch there are 5 connections, 2 of which
are double and 1 single. The connections are numbered 1,2 and 3.
Number 1 spade connection is the single one. Numbers 2 and 3 have
double spade end connections on them.
Am I right in assuming that the single connection( number 1)is for a
live feed from the battery?. If so, what wires go from the other
connections on the back of the switch ( numbers 2 and 3), and to
where?.
Hope I`ve made it clear enough!.
Regards
Martin

The quick and easy way to solve this problem is to use an ohmmeter or
continuity checker (even a battery and light bulb) to check for
continuity between the various terminals in each position of the
switch.

Now why didn`t I think of that!! Thankyou Peter. You are a star!.