Anyone know the difference between the PCT-IIex 1040 and 1040 other than
about $160?

--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com

Glenn Ashmore wrote:
Anyone know the difference between the PCT-IIex 1040 and 1040 other than
about $160?

Does this help?

http://www.scs-ptc.com/controller-comparison.html

I do recall one of the oldest models couldn't have upgraded firmware
(not enough memory)

Evan Gatehouse

Well I finally figured it out. The 1040 is the IIex with the Pactor III
demo and the 1041 has the license.

--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com

"Glenn Ashmore" wrote in message
news:nrdFf.20109$Dh.17590@dukeread04...
Anyone know the difference between the PCT-IIex 1040 and 1040 other than
about $160?

On Sun, 5 Feb 2006 07:43:35 -0500, "Glenn Ashmore"
wrote:

Well I finally figured it out. The 1040 is the IIex with the Pactor III
demo and the 1041 has the license.

Trust me on this one, you really do want Pactor III. Big performance
difference in real world conditions, that's my experience.