On Thu, 23 Apr 2009 21:08:20 -0600, "SteveB"
wrote:

What's a good type of rope for 100' of fresh water anchor line, 15# anchor?

Steve


Half inch three strand nylon. One outfit has anchor rodes in at least
six colors, several lengths, several sizes. One size smaller should be
strong enough, but harder on the hands. Buy one with the eyesplice and
thimble included. Don't forget to buy a shackle.

Casady

Richard Casady wrote:
On Thu, 23 Apr 2009 21:08:20 -0600, "SteveB"
wrote:

What's a good type of rope for 100' of fresh water anchor line, 15# anchor?

Steve


Half inch three strand nylon. One outfit has anchor rodes in at least
six colors, several lengths, several sizes. One size smaller should be
strong enough, but harder on the hands. Buy one with the eyesplice and
thimble included. Don't forget to buy a shackle.

Casady

Half inch anchor line? For what size boat and what sort of waters? 3/8"
might be more appropriate.

Sorry I didn't put in all the info. This is a 2 square mile lake, deepest
part, 190 feet, but most of it 100' or less, and that's where the fish hang
out. I have a 10# anchor that came with the boat, and it is of the smooth
braided line, but is in two segments that total about 50' total. The bottom
is mostly sandy or muddy, and not a lot of areas where there are rocks to
catch on. Kind of like the braided, as it is easy on the hands. Manila or
sisal would be harder on the hands, and actually 1/2' sounds good, although
it is far stronger than needed. Just wanted comments and input as per
longevity, cost, rate of wear, those things. Boat is 16' Aluminum Lund. No
current. No wind. (If if's windy, I don't go, or go home.)

Steve

On Fri, 24 Apr 2009 06:58:05 -0500, Richard Casady
wrote:

Half inch three strand nylon.

Overkill for all normal conditions. I anchored a 34 ft, 10,000 pound
boat for many years using half inch nylon. 3/8ths is more than
enough.

"Wayne.B" wrote in message
...
On Fri, 24 Apr 2009 06:58:05 -0500, Richard Casady
wrote:

Half inch three strand nylon.

Overkill for all normal conditions. I anchored a 34 ft, 10,000 pound
boat for many years using half inch nylon. 3/8ths is more than
enough.

Now that I went to the garage and looked at a hank of 3/8" rope, I agree.
Looks like 3/8" nylon it is.

Steve

"SteveB" wrote in message
...

"Wayne.B" wrote in message
...
On Fri, 24 Apr 2009 06:58:05 -0500, Richard Casady
wrote:

Half inch three strand nylon.

Overkill for all normal conditions. I anchored a 34 ft, 10,000 pound
boat for many years using half inch nylon. 3/8ths is more than
enough.

Now that I went to the garage and looked at a hank of 3/8" rope, I agree.
Looks like 3/8" nylon it is.

Steve


1/4" will work. Your hands will hate you for it.

On Fri, 24 Apr 2009 23:14:04 -0400, Wayne.B
wrote:

On Fri, 24 Apr 2009 06:58:05 -0500, Richard Casady
wrote:

Half inch three strand nylon.

Overkill for all normal conditions. I anchored a 34 ft, 10,000 pound
boat for many years using half inch nylon. 3/8ths is more than
enough.

I noted that smaller would do, but recommended 1/2 for the sake of the
hands. If you go with the skinnier stuff, it would stretch more, an
advantage, and you can always use heavy gloves to protect the hands.
Three strand is cheaper, and stretches more.

Casady

"SteveB" wrote in message
...
Sorry I didn't put in all the info. This is a 2 square mile lake, deepest
part, 190 feet, but most of it 100' or less, and that's where the fish
hang out. I have a 10# anchor that came with the boat, and it is of the
smooth braided line, but is in two segments that total about 50' total.
The bottom is mostly sandy or muddy, and not a lot of areas where there
are rocks to catch on. Kind of like the braided, as it is easy on the
hands. Manila or sisal would be harder on the hands, and actually 1/2'
sounds good, although it is far stronger than needed. Just wanted
comments and input as per longevity, cost, rate of wear, those things.
Boat is 16' Aluminum Lund. No current. No wind. (If if's windy, I don't
go, or go home.)

Steve

Steve,
If theres no wind or current and you just want to maintain position over a
favorite spot, how about just using a weight? You wouldn't need a lot of
line for scope and I'd think a 25 lb hunk of lead would work.
For anchoring in rocks a welded rebar grapple works good. When, not if it
gets caught, you can pull it out because the rebar will bend out. After you
retrieve, you bend it back into shape.

"mmc" wrote in message
g.com...

"SteveB" wrote in message
...
Sorry I didn't put in all the info. This is a 2 square mile lake,
deepest part, 190 feet, but most of it 100' or less, and that's where the
fish hang out. I have a 10# anchor that came with the boat, and it is of
the smooth braided line, but is in two segments that total about 50'
total. The bottom is mostly sandy or muddy, and not a lot of areas where
there are rocks to catch on. Kind of like the braided, as it is easy on
the hands. Manila or sisal would be harder on the hands, and actually
1/2' sounds good, although it is far stronger than needed. Just wanted
comments and input as per longevity, cost, rate of wear, those things.
Boat is 16' Aluminum Lund. No current. No wind. (If if's windy, I
don't go, or go home.)

Steve

Steve,
If theres no wind or current and you just want to maintain position over a
favorite spot, how about just using a weight? You wouldn't need a lot of
line for scope and I'd think a 25 lb hunk of lead would work.
For anchoring in rocks a welded rebar grapple works good. When, not if it
gets caught, you can pull it out because the rebar will bend out. After
you retrieve, you bend it back into shape.

Lets see.......... I'm a welder, and I have all sorts of junk and rebar
laying around. I wonder who I could get to make me one of those.

Thanks for the great idea.

Last time out, that little ten pounder was keeping us right at the point
where we stopped. With current or wind, the line would need to be longer,
but the 40something feet of line we had that day worked.

I've seen those big coffee cans filled with concrete and a rebar U poured
into it that worked fine.

On Fri, 24 Apr 2009 20:18:43 -0600, "SteveB"
wrote:

Sorry I didn't put in all the info. This is a 2 square mile lake, deepest
part, 190 feet, but most of it 100' or less, and that's where the fish hang
out. I have a 10# anchor that came with the boat, and it is of the smooth
braided line, but is in two segments that total about 50' total. The bottom
is mostly sandy or muddy, and not a lot of areas where there are rocks to
catch on. Kind of like the braided, as it is easy on the hands. Manila or
sisal would be harder on the hands, and actually 1/2' sounds good, although
it is far stronger than needed. Just wanted comments and input as per
longevity, cost, rate of wear, those things. Boat is 16' Aluminum Lund. No
current. No wind. (If if's windy, I don't go, or go home.)

Steve


I'm with you on the 1/2" rode. I've got the room for 1/2", and the
extra cost was worth the wear and tear on the hands. A set of these
inserted in the line will let you know how much is out. They're handy.

http://tinyurl.com/dz4aw6
--

John H

"My reading of history convinces me that most bad government
results from too much government."

Thomas Jefferson