Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #41   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2009
Posts: 871
Default 3800 and GM

thunder wrote:
On Fri, 17 Jul 2009 11:15:01 -0600, Canuck57 wrote:


China owns the US....


I may not be happy with the exodus of jobs from here to there, but make
no mistake, China needs us, far more than we need them. China may become
the economic powerhouse, but before it does, it will have to address it's
institutional social issues. Or, do you really believe it's "blend" of
communism and capitalism will work in the long term?


Wait until this years mortgage crisis hits the news. The downturn has a
ways to go yet.


LOL, you should stop concentrating on the lagging indicators, and start
concentrating on the leading indicators. We are by no means out of the
woods, but the recovery started several months ago. By fall, it should
be clear to even the most obtuse.



Canuck is one of the many conservatives hoping for failure. This
newsgroup is full of them. It's their only hope for election success in
the future.
  #42   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Oct 2006
Posts: 4,312
Default 3800 and GM

On Sat, 18 Jul 2009 17:27:24 -0500, thunder
wrote:

On Fri, 17 Jul 2009 11:15:01 -0600, Canuck57 wrote:


China owns the US....


I may not be happy with the exodus of jobs from here to there, but make
no mistake, China needs us, far more than we need them. China may become
the economic powerhouse, but before it does, it will have to address it's
institutional social issues. Or, do you really believe it's "blend" of
communism and capitalism will work in the long term?

Wait until this years mortgage crisis hits the news. The downturn has a
ways to go yet.


LOL, you should stop concentrating on the lagging indicators, and start
concentrating on the leading indicators. We are by no means out of the
woods, but the recovery started several months ago. By fall, it should
be clear to even the most obtuse.


Think I'll save these crystal ball predictions and we can look at them
again in November.
Although he's a dittybag, I'm putting my bet on Cannuck.
But I hope I lose.
My view is we can only go downhill without factory jobs which produce
the goods we use, and that the only thing that kept the economy alive
for the last dozen or so years was debt and the real estate and equity
bubbles. But it wouldn't be the first time I was wrong.
Here's an interesting chart
http://en.wikipedia.org/wiki/List_of...or_composition
Problem is I don't trust it, even if it means a damn thing.
Leads one to believe these are Jan, 2008 figures.
Looking for historical figures, I found this,
http://www.bookrags.com/wiki/List_of...or_composition
which leads one to believe they are 2005 figures.
Same numbers.
Geez, you mean I can't even trust the internets?
I give up.

--Vic
  #43   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jan 2007
Posts: 388
Default 3800 and GM

H the K wrote:
thunder wrote:
On Fri, 17 Jul 2009 11:15:01 -0600, Canuck57 wrote:


China owns the US....


I may not be happy with the exodus of jobs from here to there, but
make no mistake, China needs us, far more than we need them. China
may become the economic powerhouse, but before it does, it will have
to address it's institutional social issues. Or, do you really
believe it's "blend" of communism and capitalism will work in the long
term?


Wait until this years mortgage crisis hits the news. The downturn has a
ways to go yet.


LOL, you should stop concentrating on the lagging indicators, and
start concentrating on the leading indicators. We are by no means out
of the woods, but the recovery started several months ago. By fall,
it should be clear to even the most obtuse.



Canuck is one of the many conservatives hoping for failure. This
newsgroup is full of them. It's their only hope for election success in
the future.


The conservative vote will count in the next elections because they will
vote, but what will make the difference is those who were enthusiastic
obama supporters will not bother to vote for their local congressman.
  #44   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2009
Posts: 871
Default 3800 and GM

Keith Nuttle wrote:
H the K wrote:
thunder wrote:
On Fri, 17 Jul 2009 11:15:01 -0600, Canuck57 wrote:


China owns the US....

I may not be happy with the exodus of jobs from here to there, but
make no mistake, China needs us, far more than we need them. China
may become the economic powerhouse, but before it does, it will have
to address it's institutional social issues. Or, do you really
believe it's "blend" of communism and capitalism will work in the
long term?


Wait until this years mortgage crisis hits the news. The downturn
has a
ways to go yet.

LOL, you should stop concentrating on the lagging indicators, and
start concentrating on the leading indicators. We are by no means
out of the woods, but the recovery started several months ago. By
fall, it should be clear to even the most obtuse.



Canuck is one of the many conservatives hoping for failure. This
newsgroup is full of them. It's their only hope for election success
in the future.


The conservative vote will count in the next elections because they will
vote, but what will make the difference is those who were enthusiastic
obama supporters will not bother to vote for their local congressman.



Yeah, right, the majority of Americans will want to return to the
glorious years of Republican failure. Sure.
  #45   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 902
Default 3800 and GM

On Sat, 18 Jul 2009 19:55:49 -0500, Vic Smith wrote:


My view is we can only go downhill without factory jobs which produce
the goods we use, and that the only thing that kept the economy alive
for the last dozen or so years was debt and the real estate and equity
bubbles. But it wouldn't be the first time I was wrong. Here's an
interesting chart
http://en.wikipedia.org/wiki/List_of...or_composition
Problem is I don't trust it, even if it means a damn thing. Leads one to
believe these are Jan, 2008 figures. Looking for historical figures, I
found this,
http://www.bookrags.com/wiki/List_of...or_composition
which leads one to believe they are 2005 figures. Same numbers.
Geez, you mean I can't even trust the internets? I give up.


Interesting charts, but you'll note, if you pull China out of the top ten
world economies, the rest have close to the same sector breakdown. I'll
admit we are a little low in the industrial sector, by world standards, a
lot low, by my standards. I agree with you that industrial jobs are what
made this country great, and I have to admit I've never been able to get
my head around the benefits of this "service economy".

From an economic standpoint, however, our balance of trade deficits are
far more damaging, long term, in my mind. Still, with all our problems,
this country is incredibly resilient, and we are heading into a
recovery. The leading indicators I was referring to, can be found he


http://www.businesscycle.com/

http://www.conference-board.org/econ...se_output.cfm?
cid=1



  #46   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Oct 2006
Posts: 4,312
Default 3800 and GM

On Sat, 18 Jul 2009 21:02:26 -0500, thunder
wrote:


From an economic standpoint, however, our balance of trade deficits are
far more damaging, long term, in my mind.


Well, losing industrial capacity has caused half the trade deficit,
the other half being energy. That's a simplification of course.

Still, with all our problems,
this country is incredibly resilient, and we are heading into a
recovery. The leading indicators I was referring to, can be found he

Hope you're right. I have a somewhat jaundiced view on using the past
as a barometer for the future, but do think it will work out well,
just different. The past economy is gone.

http://www.businesscycle.com/

http://www.conference-board.org/econ...se_output.cfm?
cid=1


Whatever you prefer to look at. I don't forget that these same
prognosticators failed miserably in all the predictions they made just
1 short year ago.
I really like this C-Organizer Pro thing I have.
I just pasted this thread title into an appointment with a few clicks,
and on November 1st it will pop up.
We'll see then.

--Vic


  #47   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 902
Default 3800 and GM

On Sat, 18 Jul 2009 21:40:07 -0500, Vic Smith wrote:


I really like this C-Organizer Pro thing I have. I just pasted this
thread title into an appointment with a few clicks, and on November 1st
it will pop up.
We'll see then.


Uh, oh, you mean I'm going to be held responsible for something I said on
usenet? :-)
  #48   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Oct 2006
Posts: 4,312
Default 3800 and GM

On Sat, 18 Jul 2009 22:01:54 -0500, thunder
wrote:

On Sat, 18 Jul 2009 21:40:07 -0500, Vic Smith wrote:


I really like this C-Organizer Pro thing I have. I just pasted this
thread title into an appointment with a few clicks, and on November 1st
it will pop up.
We'll see then.


Uh, oh, you mean I'm going to be held responsible for something I said on
usenet? :-)


Accountability, my friend. My middle name. (-:

--Vic
  #49   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2009
Posts: 79
Default 3800 and GM

H the K wrote:
BAR wrote:
H the K wrote:
Jack wrote:
On Jul 16, 1:24 pm, nada wrote:


My ex wife worked at the Lordstown, Ohio GM plant. She intentially
shut down the line one day, and the union protected her and kept her
from being fired. She told me the stories of how she and her co-
workers harmed the company, messed with the cars, and generally were
just bad employees, and through it all they kept their jobs and kept
getting raises and bennies. There's a word for how people feel about
this kind of union-bred crap, but it's certainly not "envy".


So, your ex-wife was a loser. So are you. What a surprise.


Should she have been fired and civilly charged?



For marrying jackoff? Isn't that punishment enough?


I assume you have called an end to the truce. It was great while it
lasted. So what sin did your wife commit that caused her to be saddled
with your sorry ass?
  #50   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2009
Posts: 79
Default 3800 and GM

H the K wrote:
Jack wrote:
On Jul 17, 8:29 am, BAR wrote:
H the K wrote:
Jack wrote:
On Jul 16, 1:24 pm, nada wrote:
My ex wife worked at the Lordstown, Ohio GM plant. She intentially
shut down the line one day, and the union protected her and kept her
from being fired. She told me the stories of how she and her co-
workers harmed the company, messed with the cars, and generally were
just bad employees, and through it all they kept their jobs and kept
getting raises and bennies. There's a word for how people feel about
this kind of union-bred crap, but it's certainly not "envy".
So, your ex-wife was a loser. So are you. What a surprise.
Should she have been fired and civilly charged?


Of course. Unfortunately, union protection in the workplace
encourages this type of behavior. The union tells you that management
is out to get you, so they enable this kind of stuff. That's criminal.



It's a nice tale you tell, jackoff, and your ex probably told it to you
just to raise your blood pressure, in the hope you'd FOAD and she could
collect some insurance.

I recall several incidents at unionized plants. Once, a worker "stopped
the line" when he was quite literally devoured by a machine on which
management had removed the safety devices. Management, of course, wanted
the machine cleaned so it wouldn't mess up product.

At another facility, an employee was seriously injured when a product
robot cart ran over him. It was equipped with special impact sensing
bumpers that were supposed to stop immediately if they touched anything.
The "fail-safe" was some sort of line preceding the cart that was
attached to the overhead power track. The employee's body derailed the
robocart and it stopped. Finally

At an investigation, the manager of the plant was eager to demonstrate
how safe the devices were. So he had the robocart cranked up while he
stood in its path. Yep. The bumpers touched his legs, and the cart kept
on coming. He couldn't grab the pull-cord safety line because, well,
because he was already on his way to the concrete floor and the line was
out of his reach.

That particular gem was on TV. :)

Oh. Management. You bet your ass it is out to get you.


Bite the hand that feeds you. Ya, that'll work. Such a moron you are,
Krause.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
oil pressure is gone above 3800 rpm (volvo penta 3.0 from 1996) josZ General 9 September 5th 05 11:53 AM
FS: 03 Pursuit 3800 Express in S. Florida Dan Krueger Marketplace 1 March 12th 04 02:03 AM


All times are GMT +1. The time now is 03:26 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017