![]() |
|
More electric power for the Johnson Sea Horse 85....
I'm doing some thinking. I'm not a slave to fashion, but I am to
function. There's enough shaft space on the top of my v4's flywheel to mount another pulley, and I'm considering mounting about a 50-75 amp 12volt alternator on an external bracket and running a belt though the cowling. The reason why is because the meager 10 amp stator on the engine itself jsut isn't going to cut it. I can modify the brackets so the external alternator is independant of being under the hood with the gas fumes. I know the 85 will suck gas anyhow, so what's a bit extra drag? And I know the contraption will look like a tumr hanging off the side or rear of the engine, but I can do some specific cowling work to modify it so it isnt' so 'tacky' . Even Rube Goldberg had good ideas... sometimes. But also like what Gfretwell pointed out, once can make a charging system off a small gasoline lawnmower engine contraption. I've done this too. But there are some really neat, small and highly efficient alternators ont he market noow that have less drag of horspower to produce the same amount of wattage as apposed to even the automotive units made 20 years ago. In other words, I can make a simple 30 amp, self regulated unit run off a 40cc chain-saw engine.and the exhaust can be quieted down so you don't hear all the buzzing racket, and this can be an advantage because both engines would share the same fuel mixture. OR, I might ust go by an 1800w gasoline inverter power pack. Even though they may not go very far, the wheels are turning |
More electric power for the Johnson Sea Horse 85....
On 4/30/10 8:57 AM, Tim wrote:
I'm doing some thinking. I'm not a slave to fashion, but I am to function. There's enough shaft space on the top of my v4's flywheel to mount another pulley, and I'm considering mounting about a 50-75 amp 12volt alternator on an external bracket and running a belt though the cowling. The reason why is because the meager 10 amp stator on the engine itself jsut isn't going to cut it. I can modify the brackets so the external alternator is independant of being under the hood with the gas fumes. I know the 85 will suck gas anyhow, so what's a bit extra drag? And I know the contraption will look like a tumr hanging off the side or rear of the engine, but I can do some specific cowling work to modify it so it isnt' so 'tacky' . Even Rube Goldberg had good ideas... sometimes. But also like what Gfretwell pointed out, once can make a charging system off a small gasoline lawnmower engine contraption. I've done this too. But there are some really neat, small and highly efficient alternators ont he market noow that have less drag of horspower to produce the same amount of wattage as apposed to even the automotive units made 20 years ago. In other words, I can make a simple 30 amp, self regulated unit run off a 40cc chain-saw engine.and the exhaust can be quieted down so you don't hear all the buzzing racket, and this can be an advantage because both engines would share the same fuel mixture. OR, I might ust go by an 1800w gasoline inverter power pack. Even though they may not go very far, the wheels are turning http://tinyurl.com/2ejjkbb About a grand, Honda, quiet, works...no experimentation needed. Unlikely to get you pulled over by Homeland Security types who think that device you built and plopped on your boat is a detonator for a nuclear device. -- The Tea Party's teabaggers are just the Republican base by another name. |
More electric power for the Johnson Sea Horse 85....
On Apr 30, 9:07*am, hk wrote:
On 4/30/10 8:57 AM, Tim wrote: I'm doing some thinking. I'm not a slave to fashion, but I am to function. There's enough shaft space on the top of my v4's flywheel to mount another pulley, and I'm considering mounting about a 50-75 amp 12volt alternator on an external bracket and running a belt though the cowling. The reason why is because the meager 10 amp stator on the engine itself jsut isn't going to cut it. I can modify the brackets so the external alternator is independant of being under the hood with the gas fumes. I know the 85 will suck gas anyhow, so what's a bit extra drag? And I know the contraption will look like a tumr hanging off the side or rear of the engine, but I can do some specific cowling work to modify it so it isnt' so 'tacky' . *Even Rube Goldberg had good ideas... sometimes. But also like what *Gfretwell pointed out, once can make a charging system off a small gasoline lawnmower engine contraption. I've done this too. But there are some really neat, small and highly efficient alternators ont he market noow that have less drag of horspower to produce the same amount of wattage as apposed to even the automotive units made 20 years ago. In other words, I can make a simple 30 amp, self regulated unit run off a 40cc chain-saw engine.and the exhaust can be quieted down so you don't hear all the buzzing racket, and this can be an advantage because both engines would share the same fuel mixture. OR, I might ust go by an 1800w gasoline inverter power pack. Even though they may not go very far, the wheels are turning http://tinyurl.com/2ejjkbb About a grand, Honda, quiet, works...no experimentation needed. Unlikely to get you pulled over by Homeland Security types who think that device you built and plopped on your boat is a detonator for a nuclear device. -- The Tea Party's teabaggers are just the Republican base by another name.- Hide quoted text - - Show quoted text - Built and plopped on? Just because you have absolutely no mechanical skills doesn't mean that someone else doesn't. |
More electric power for the Johnson Sea Horse 85....
On Apr 30, 8:07*am, hk wrote:
On 4/30/10 8:57 AM, Tim wrote: I'm doing some thinking. I'm not a slave to fashion, but I am to function. There's enough shaft space on the top of my v4's flywheel to mount another pulley, and I'm considering mounting about a 50-75 amp 12volt alternator on an external bracket and running a belt though the cowling. The reason why is because the meager 10 amp stator on the engine itself jsut isn't going to cut it. I can modify the brackets so the external alternator is independant of being under the hood with the gas fumes. I know the 85 will suck gas anyhow, so what's a bit extra drag? And I know the contraption will look like a tumr hanging off the side or rear of the engine, but I can do some specific cowling work to modify it so it isnt' so 'tacky' . *Even Rube Goldberg had good ideas... sometimes. But also like what *Gfretwell pointed out, once can make a charging system off a small gasoline lawnmower engine contraption. I've done this too. But there are some really neat, small and highly efficient alternators ont he market noow that have less drag of horspower to produce the same amount of wattage as apposed to even the automotive units made 20 years ago. In other words, I can make a simple 30 amp, self regulated unit run off a 40cc chain-saw engine.and the exhaust can be quieted down so you don't hear all the buzzing racket, and this can be an advantage because both engines would share the same fuel mixture. OR, I might ust go by an 1800w gasoline inverter power pack. Even though they may not go very far, the wheels are turning http://tinyurl.com/2ejjkbb About a grand, Honda, quiet, works...no experimentation needed. Unlikely to get you pulled over by Homeland Security types who think that device you built and plopped on your boat is a detonator for a nuclear device. -- The Tea Party's teabaggers are just the Republican base by another name.- Hide quoted text - - Show quoted text - Thanks for the suggestion, Harry. but I'd just as soon make something. I mean, I have the parts and it is in my line of work, and I'm an auto- electric mechanic so..... It just seems I should be able to come up with something I know about instead of paying a wad for somebody's stuff. And I believe I can do it for a 10th of what that Honda would run....if not less. Like I mentioned. I'm not a slave to fashion, and we're going places where fish poop, and not a gala outing at the Yacht Club. Besides, if it goes overboard, there's no real loss, but the Honda? I'd probably have to go diving for that one. |
More electric power for the Johnson Sea Horse 85....
On Apr 30, 8:56*am, Loogypicker wrote:
On Apr 30, 9:07*am, hk wrote: On 4/30/10 8:57 AM, Tim wrote: I'm doing some thinking. I'm not a slave to fashion, but I am to function. There's enough shaft space on the top of my v4's flywheel to mount another pulley, and I'm considering mounting about a 50-75 amp 12volt alternator on an external bracket and running a belt though the cowling. The reason why is because the meager 10 amp stator on the engine itself jsut isn't going to cut it. I can modify the brackets so the external alternator is independant of being under the hood with the gas fumes. I know the 85 will suck gas anyhow, so what's a bit extra drag? And I know the contraption will look like a tumr hanging off the side or rear of the engine, but I can do some specific cowling work to modify it so it isnt' so 'tacky' . *Even Rube Goldberg had good ideas... sometimes. But also like what *Gfretwell pointed out, once can make a charging system off a small gasoline lawnmower engine contraption. I've done this too. But there are some really neat, small and highly efficient alternators ont he market noow that have less drag of horspower to produce the same amount of wattage as apposed to even the automotive units made 20 years ago. In other words, I can make a simple 30 amp, self regulated unit run off a 40cc chain-saw engine.and the exhaust can be quieted down so you don't hear all the buzzing racket, and this can be an advantage because both engines would share the same fuel mixture. OR, I might ust go by an 1800w gasoline inverter power pack. Even though they may not go very far, the wheels are turning http://tinyurl.com/2ejjkbb About a grand, Honda, quiet, works...no experimentation needed. Unlikely to get you pulled over by Homeland Security types who think that device you built and plopped on your boat is a detonator for a nuclear device. -- The Tea Party's teabaggers are just the Republican base by another name..- Hide quoted text - - Show quoted text - Built and plopped on? Just because you have absolutely no mechanical skills doesn't mean that someone else doesn't.- Hide quoted text - - Show quoted text - I think this sums it up, Loog. "Far better is it to dare mighty things, to win glorius triumphs, even though checkered by failure... than to rank with those poor spirits who neither enjoy nor suffer much, because they live in a gray twilight that knows not victory nor defeat. " Theodore Roosevelt |
More electric power for the Johnson Sea Horse 85....
On Apr 30, 10:53*am, Tim wrote:
On Apr 30, 8:56*am, Loogypicker wrote: On Apr 30, 9:07*am, hk wrote: On 4/30/10 8:57 AM, Tim wrote: I'm doing some thinking. I'm not a slave to fashion, but I am to function. There's enough shaft space on the top of my v4's flywheel to mount another pulley, and I'm considering mounting about a 50-75 amp 12volt alternator on an external bracket and running a belt though the cowling. The reason why is because the meager 10 amp stator on the engine itself jsut isn't going to cut it. I can modify the brackets so the external alternator is independant of being under the hood with the gas fumes. I know the 85 will suck gas anyhow, so what's a bit extra drag? And I know the contraption will look like a tumr hanging off the side or rear of the engine, but I can do some specific cowling work to modify it so it isnt' so 'tacky' . *Even Rube Goldberg had good ideas... sometimes. But also like what *Gfretwell pointed out, once can make a charging system off a small gasoline lawnmower engine contraption. I've done this too. But there are some really neat, small and highly efficient alternators ont he market noow that have less drag of horspower to produce the same amount of wattage as apposed to even the automotive units made 20 years ago. In other words, I can make a simple 30 amp, self regulated unit run off a 40cc chain-saw engine.and the exhaust can be quieted down so you don't hear all the buzzing racket, and this can be an advantage because both engines would share the same fuel mixture. OR, I might ust go by an 1800w gasoline inverter power pack. Even though they may not go very far, the wheels are turning http://tinyurl.com/2ejjkbb About a grand, Honda, quiet, works...no experimentation needed. Unlikely to get you pulled over by Homeland Security types who think that device you built and plopped on your boat is a detonator for a nuclear device. -- The Tea Party's teabaggers are just the Republican base by another name.- Hide quoted text - - Show quoted text - Built and plopped on? Just because you have absolutely no mechanical skills doesn't mean that someone else doesn't.- Hide quoted text - - Show quoted text - I think this sums it up, Loog. "Far better is it to dare mighty things, to win glorius triumphs, even though checkered by failure... than to rank with those poor spirits who neither enjoy nor suffer much, because they live in a gray twilight that knows not victory nor defeat. " Theodore Roosevelt- Hide quoted text - - Show quoted text - Indeed, brother! |
More electric power for the Johnson Sea Horse 85....
Tim wrote:
I think this sums it up, Loog. "Far better is it to dare mighty things, to win glorius triumphs, even though checkered by failure... than to rank with those poor spirits who neither enjoy nor suffer much, because they live in a gray twilight that knows not victory nor defeat. " Theodore Roosevelt Just figure out how many fingers that's worth before doing anything. Jim - Always count my fingers before getting brave. |
More electric power for the Johnson Sea Horse 85....
On Apr 30, 11:19*am, Jim wrote:
Tim wrote: I think this sums it up, Loog. "Far better is it to dare mighty things, to win glorius triumphs, even though checkered by failure... than to rank with those poor spirits who neither enjoy nor suffer much, because they live in a gray twilight that knows not victory nor defeat. " Theodore Roosevelt Just figure out how many fingers that's worth before doing anything. Jim - Always count my fingers before getting brave. And make sure not to take a leak over the back of the boat? ?8^ 0 |
More electric power for the Johnson Sea Horse 85....
On Apr 30, 12:23*pm, Tim wrote:
On Apr 30, 11:19*am, Jim wrote: Tim wrote: I think this sums it up, Loog. "Far better is it to dare mighty things, to win glorius triumphs, even though checkered by failure... than to rank with those poor spirits who neither enjoy nor suffer much, because they live in a gray twilight that knows not victory nor defeat. " Theodore Roosevelt Just figure out how many fingers that's worth before doing anything. Jim - Always count my fingers before getting brave. And make sure not to take a leak over the back of the boat? ?8^ 0 Back before college, one of the shops I worked in had a condensor charger for checking Briggs condensors. You charge it up and watch leak down then discharge because if you didn't you get a hell of a shock. Boss's kid always came in after school and thought he could mess with anything he wanted, take your tools, etc. So I charged a condensor up just before I knew he'd be there, and sat it on my steel bench. Kid comes in, and of COURSE leans over the bench and grabs said condensor, well, tried to. When a spark hit his hand when it was about half an inch away, he let out a scream and hauled ass! |
All times are GMT +1. The time now is 08:38 PM. |
|
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com