About Us

Spoofer

In article ,
says...

"Spoofer" wrote in message
...
In article ,
says...

"Tim" wrote in message
...
On Jan 16, 1:14 pm, "MMC" wrote:
"Frogwatch" wrote in message

...

I know the weather is bad for most of you and I know how much "cabin
fever" can make me "on edge" too. So, all you flamers, GO OUTSIDE,
even if it is ice fishing. Go skiing or snowshoeing, but get outside
for a couple of hours. Then come back and we'll talk boats.

=======

I've been working on my old Morgan 24. Got all the old rotted teak off
and
have sanded about 30% in preparation for painting. Bought a gallon of
epoxy
primer (man has that crap gotten expensive!) to go along with the 3
quart
kits of Interlux Interthane plus I had on the shelf. Gelcoat is very
bad
shape and that's why I went with the epoxy primer.
Got a couple new Beckson opening ports for the v-berth and will
install
after the paint dries.
Decks and house will be Hatteras Off White and the hull a dark green
(have
picked out a paint yet for this, probably go with Brightside).
Replacing the old teak with "Azek" fake lumber. About one 20th the
cost
of
teak, easy to work with and no sanding and varnishing later. I've made
the
new hand rails and the look pretty good.
All outside stuff and you're right, being stuck inside makes people
mean
as
snakes.

That's one reason I've been cutting firewood. running a chainsaw, weed-
eater or push lawnmower is good therapy for me. Beats knocking
somebody up the side of the head...

Yeah but... there are half a dozen or so posters here who really need
your
head knocking services.
It would be for their own good so it could qualify as a charitable
service.

Another stupid reply from Don.

Case in point.............................

Indeed, it WAS an extremely stupid post from you.

Spoofer

In article ,
says...

"Califbill" wrote in message
m...
"YukonBound" wrote in message
...

"Tim" wrote in message
...
On Jan 16, 1:14 pm, "MMC" wrote:
"Frogwatch" wrote in message

...

I know the weather is bad for most of you and I know how much "cabin
fever" can make me "on edge" too. So, all you flamers, GO OUTSIDE,
even if it is ice fishing. Go skiing or snowshoeing, but get outside
for a couple of hours. Then come back and we'll talk boats.

=======

I've been working on my old Morgan 24. Got all the old rotted teak off
and
have sanded about 30% in preparation for painting. Bought a gallon of
epoxy
primer (man has that crap gotten expensive!) to go along with the 3
quart
kits of Interlux Interthane plus I had on the shelf. Gelcoat is very bad
shape and that's why I went with the epoxy primer.
Got a couple new Beckson opening ports for the v-berth and will install
after the paint dries.
Decks and house will be Hatteras Off White and the hull a dark green
(have
picked out a paint yet for this, probably go with Brightside).
Replacing the old teak with "Azek" fake lumber. About one 20th the cost
of
teak, easy to work with and no sanding and varnishing later. I've made
the
new hand rails and the look pretty good.
All outside stuff and you're right, being stuck inside makes people mean
as
snakes.

That's one reason I've been cutting firewood. running a chainsaw, weed-
eater or push lawnmower is good therapy for me. Beats knocking
somebody up the side of the head...

Yeah but... there are half a dozen or so posters here who really need your
head knocking services.
It would be for their own good so it could qualify as a charitable
service.

Reply:
Asshole!

Ah, Kalif Swill awakens from another drunken stupor..............

He was giving you the benefit of doubt. He may not realize just what a
dumb ass you are.

L G[_16_]

Harryk wrote:
On 1/17/11 6:55 PM, Harryk wrote:
On 1/17/11 6:39 PM, Califbill wrote:
"I am Tosk" wrote in message
...

In article cee50221-872b-450d-a446-9c59166b96d2@
29g2000yqq.googlegroups.com, says...

On Jan 16, 1:26 pm, Harryk wrote:
The manual is silent on how much you open the gas valve on the
tank. I
opened it all the way and then shut it off when the "test" was
finished.

You should always open the valve all the way on an LP tank. They are
designed with a "back-seat", which seals the valve stem when openend.
If you partially open it, gas can leak from the stem.

Wow, I did not know that.. I never seat anything unless I need to.

Arrgh! I guess I'll have to check "the google," since we have
conflicting information here. Maybe I'll just send an email to Weber.

This site says to open the valve all the way. I emailed weber
and will post its answer:

http://www.ehow.com/how_7429091_ligh...ll-safely.html
You had to Google "how to light a gas grill"? Amazing!

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A bit off the beaten path - "aquabar25-1-08 cabin cruiser leaving_cml size.jpg" yEnc (1/1)	BoilerBill[_3_]	Tall Ship Photos	0	February 17th 08 12:55 AM
A bit off the beaten path - "aquabar25-1-08 cabin cruiser leaving.jpg" yEnc (4/4)	BoilerBill[_3_]	Tall Ship Photos	0	February 17th 08 12:54 AM
A bit off the beaten path - "aquabar25-1-08 cabin cruiser leaving.jpg" yEnc (3/4)	BoilerBill[_3_]	Tall Ship Photos	0	February 17th 08 12:54 AM
A bit off the beaten path - "aquabar25-1-08 cabin cruiser leaving.jpg" yEnc (2/4)	BoilerBill[_3_]	Tall Ship Photos	0	February 17th 08 12:54 AM
A bit off the beaten path - "aquabar25-1-08 cabin cruiser leaving.jpg" yEnc (1/4)	BoilerBill[_3_]	Tall Ship Photos	0	February 17th 08 12:54 AM

Menu

About Us