I have just bought a 1988 Mastercraft Prostar 190 with a 351 Indmar engine. I am trying to find an info source so I can get her fixed up. It runs but had to remove a bunch of the clutch springs that were jamming up the flywheel and clutch.

I need to find a service manual for the engine and a parts source also. Any help is appreciated.

On Mar 19, 1:40*pm, AH64ADMP wrote:
I have just bought a 1988 Mastercraft Prostar 190 with a 351 Indmar
engine. *I am trying to find an info source so I can get her fixed up.
It runs but had to remove a bunch of the clutch springs that were
jamming up the flywheel and clutch. *

I need to find a service manual for the engine and a parts source also.
Any help is appreciated.

--
AH64ADMP

Try he www.marineengine.com

Don't ask here. All you'll get is a bunch of crusty old ****s, and
Usenet ID cowards trying to tell you about their latest chili recipes,
golf game, politics, trailer adventures, etc, etc.

Nothing of ANY use.

On 3/19/2011 2:47 PM, *e#c wrote:
On Mar 19, 1:40 pm, wrote:
I have just bought a 1988 Mastercraft Prostar 190 with a 351 Indmar
engine. I am trying to find an info source so I can get her fixed up.
It runs but had to remove a bunch of the clutch springs that were
jamming up the flywheel and clutch.

I need to find a service manual for the engine and a parts source also.
Any help is appreciated.

--
AH64ADMP

Try he www.marineengine.com

Don't ask here. All you'll get is a bunch of crusty old ****s, and
Usenet ID cowards trying to tell you about their latest chili recipes,
golf game, politics, trailer adventures, etc, etc.

Nothing of ANY use.

Didn't you bring a 50 year old ChrisCraft back from the boneyard? I'll
bet you have a lot of sage advice you could share with this fellow.

On Mar 19, 12:40*pm, AH64ADMP wrote:
I have just bought a 1988 Mastercraft Prostar 190 with a 351 Indmar
engine. *I am trying to find an info source so I can get her fixed up.
It runs but had to remove a bunch of the clutch springs that were
jamming up the flywheel and clutch. *

I need to find a service manual for the engine and a parts source also.
Any help is appreciated.

--
AH64ADMP

You might try this place. http://www.skidim.com/ I've seen their
site before, and it looks to me like they have a free online tech
support.

Good luck!

Ernie wrote:
On 3/19/2011 2:47 PM, *e#c wrote:
On Mar 19, 1:40 pm, wrote:
I have just bought a 1988 Mastercraft Prostar 190 with a 351 Indmar
engine. I am trying to find an info source so I can get her fixed up.
It runs but had to remove a bunch of the clutch springs that were
jamming up the flywheel and clutch.

I need to find a service manual for the engine and a parts source also.
Any help is appreciated.

--
AH64ADMP

Try he www.marineengine.com

Don't ask here. All you'll get is a bunch of crusty old ****s, and
Usenet ID cowards trying to tell you about their latest chili recipes,
golf game, politics, trailer adventures, etc, etc.

Nothing of ANY use.

Didn't you bring a 50 year old ChrisCraft back from the boneyard? I'll
bet you have a lot of sage advice you could share with this fellow.
Secord is a huge asshole.

On Mar 19, 3:04*pm, Ernie wrote:
On 3/19/2011 2:47 PM, *e#c wrote:









On Mar 19, 1:40 pm, *wrote:
I have just bought a 1988 Mastercraft Prostar 190 with a 351 Indmar
engine. *I am trying to find an info source so I can get her fixed up.
It runs but had to remove a bunch of the clutch springs that were
jamming up the flywheel and clutch.

I need to find a service manual for the engine and a parts source also..
Any help is appreciated.

--
AH64ADMP

Try he * *www.marineengine.com

Don't ask here. All you'll get is a bunch of crusty old ****s, and
Usenet ID cowards trying to tell you about their latest chili recipes,
golf game, politics, trailer adventures, etc, etc.

Nothing of ANY use.

Didn't you bring a 50 year old ChrisCraft back from the boneyard? I'll
bet you have a lot of sage advice you could share with this fellow.

Wrong, its 40 years old, runs great, and gets me out and back without
a worry. I don't see or read anything about your Boat.

On Mar 20, 12:06*am, L G wrote:
Ernie wrote:
On 3/19/2011 2:47 PM, *e#c wrote:
On Mar 19, 1:40 pm, *wrote:
I have just bought a 1988 Mastercraft Prostar 190 with a 351 Indmar
engine. *I am trying to find an info source so I can get her fixed up.
It runs but had to remove a bunch of the clutch springs that were
jamming up the flywheel and clutch.

I need to find a service manual for the engine and a parts source also.
Any help is appreciated.

--
AH64ADMP

Try he * *www.marineengine.com

Don't ask here. All you'll get is a bunch of crusty old ****s, and
Usenet ID cowards trying to tell you about their latest chili recipes,
golf game, politics, trailer adventures, etc, etc.

Nothing of ANY use.

Didn't you bring a 50 year old ChrisCraft back from the boneyard? I'll
bet you have a lot of sage advice you could share with this fellow.

Secord is a huge asshole.

Unlike a useless Counter Man like you, huh champ?

On Mar 20, 12:06*am, L G wrote:
Ernie wrote:
On 3/19/2011 2:47 PM, *e#c wrote:
On Mar 19, 1:40 pm, *wrote:
I have just bought a 1988 Mastercraft Prostar 190 with a 351 Indmar
engine. *I am trying to find an info source so I can get her fixed up.
It runs but had to remove a bunch of the clutch springs that were
jamming up the flywheel and clutch.

I need to find a service manual for the engine and a parts source also.
Any help is appreciated.

--
AH64ADMP

Try he * *www.marineengine.com

Don't ask here. All you'll get is a bunch of crusty old ****s, and
Usenet ID cowards trying to tell you about their latest chili recipes,
golf game, politics, trailer adventures, etc, etc.

Nothing of ANY use.

Didn't you bring a 50 year old ChrisCraft back from the boneyard? I'll
bet you have a lot of sage advice you could share with this fellow.

Secord is a huge asshole.

Actually totally eclipsed by you, ****head.

On 3/20/2011 5:09 PM, *e#c wrote:
On Mar 19, 3:04 pm, wrote:
On 3/19/2011 2:47 PM, *e#c wrote:









On Mar 19, 1:40 pm, wrote:
I have just bought a 1988 Mastercraft Prostar 190 with a 351 Indmar
engine. I am trying to find an info source so I can get her fixed up.
It runs but had to remove a bunch of the clutch springs that were
jamming up the flywheel and clutch.

I need to find a service manual for the engine and a parts source also.
Any help is appreciated.

--
AH64ADMP

Try he www.marineengine.com

Don't ask here. All you'll get is a bunch of crusty old ****s, and
Usenet ID cowards trying to tell you about their latest chili recipes,
golf game, politics, trailer adventures, etc, etc.

Nothing of ANY use.

Didn't you bring a 50 year old ChrisCraft back from the boneyard? I'll
bet you have a lot of sage advice you could share with this fellow.

Wrong, its 40 years old, runs great, and gets me out and back without
a worry. I don't see or read anything about your Boat.

I'm waiting for Harry to gush all over his boat first. Trust me. We'll
have a field day when he does.

On 3/20/11 5:09 PM, *e#c wrote:
..

Didn't you bring a 50 year old ChrisCraft back from the boneyard? I'll
bet you have a lot of sage advice you could share with this fellow.

Wrong, its 40 years old, runs great, and gets me out and back without
a worry. I don't see or read anything about your Boat.

Damn you need to sell that old POS and buy yourself a toothbrush.