In article ,
says...

In article 3a90bf43-5d39-425a-b668-ac959086cb50
@a2g2000prf.googlegroups.com, says...

On Jul 27, 3:51*am, I_am_Tosk wrote:
In article 84674639-d842-4517-be66-bfd1ae004e89
@e40g2000yqn.googlegroups.com, says...



On Jul 26, 6:43*pm, basskisser wrote:
Enough said right there!

Oh look, it's Loogy......

Uh, no... It's Harry. *To* many of us have been ignoring him so he is
starting the cycle of destruction again...

--
Team Rowdy Mouse, Banned from the Mall for life!


uhh... shouldn't that be *too*??

I don't know, did you not know what I meant.. Anyway, back to the bin
with you pussy...

No, probably not, my little buddy Don isn't too bright, that's why all
he can do is pick our typos and simple mistakes. My group is dead, so he
and I will be here posting again, even though we claim to hate this
place.

In article ,
says...

On 7/27/11 9:07 AM, I_am_Tosk wrote:


Uh, I fixed the pw within an hour or so.... Never had one apart before.
And as to wrenching, don't be a douchbag pig boy, Jessica and I do all
the work on the bike. We did a top end with piston, rings, valves (shop
cut valve seats and honed piston) and a few other minor parts. She did
90% of the work with me offering guidance on spoooging the thing with
oil and I used the torque wrench. She did the rest from sliding the
cylinder over the piston, to lining up the timing chain and cams. The
thing starts first kick, I am very proud of her and we saved almost 600
bucks doing the job ourselves... Now, back to the filter with you pig
boy, go clean your yard...


It's nice that you are preparing your daughter for a job at the local
motorbike shop after she finishes high school.

Now, did your top-end rebuild result in a racing victory?

You should put the $600 you saved in your daughter's college fund. UConn
ain't cheap, and there are no athletic scholarships for motorbike racers.

You ****ing spoofer, how do you know if and to what amount Scott's
family is contributing to their daughter's education?

In article , says...

I_am_Tosk wrote:


Uh, I fixed the pw within an hour or so.... Never had one apart before.
And as to wrenching, don't be a douchbag pig boy, Jessica and I do all
the work on the bike. We did a top end with piston, rings, valves (shop
cut valve seats and honed piston) and a few other minor parts. She did
90% of the work with me offering guidance on spoooging the thing with
oil and I used the torque wrench. She did the rest from sliding the
cylinder over the piston, to lining up the timing chain and cams. The
thing starts first kick, I am very proud of her and we saved almost 600
bucks doing the job ourselves... Now, back to the filter with you pig
boy, go clean your yard...


Cool. I love doing top ends!
Nice when she fires right up too!
Don't expect the fleabaggers to understand this!

Oh, look, it's moron Loogy.

In article m, "not a
says...

On 7/27/2011 9:22 AM, basskisser wrote:
I_am_Tosk wrote:


Uh, I fixed the pw within an hour or so.... Never had one apart
before. And as to wrenching, don't be a douchbag pig boy, Jessica and
I do all the work on the bike. We did a top end with piston, rings,
valves (shop cut valve seats and honed piston) and a few other minor
parts. She did 90% of the work with me offering guidance on spoooging
the thing with oil and I used the torque wrench. She did the rest from
sliding the cylinder over the piston, to lining up the timing chain
and cams. The thing starts first kick, I am very proud of her and we
saved almost 600 bucks doing the job ourselves... Now, back to the
filter with you pig boy, go clean your yard...


Cool. I love doing top ends!
Nice when she fires right up too!
Don't expect the fleabaggers to understand this!

Those so called fleabaggers don't have any appreciation for the
satisfaction do it yourselfers get from completeing a task without
having to pay someone to do it.

I'm too big of a coward to attempt doing anything for myself.

In article om,
says...

On 7/27/2011 8:49 AM, North Star wrote:
On Jul 27, 8:56 am, wrote:
On 7/27/11 2:51 AM, I_am_Tosk wrote:

In article84674639-d842-4517-be66-bfd1ae004e89
@e40g2000yqn.googlegroups.com, says...

On Jul 26, 6:43 pm, wrote:
Enough said right there!

Oh look, it's Loogy......

Uh, no... It's Harry. To many of us have been ignoring him so he is
starting the cycle of destruction again...

Oh, and once again the moron who claims to be a network maven who
operates an internet services company proves he knows no more about the
internet than he does about "wrenching" a winning motorbike.

Wrenching a motorbike???
He couldn't figure out what was wrong with a pressure washer.
Some mechanic.............. he must get his mechanical advice from
JohnnyH

Well then, JohhnyH must have steered him in the right direction since
the problem was reported resolved. Don't you wish your mentor knew
something about anything?

Hey, I know everything, just ask me. Trouble is, I'm just too much of a
coward to attempt to fix anything myself. Although I've stated here that
I've taken many mechanical engineering courses.

In article m, "not a
says...

On 7/27/2011 9:22 AM, basskisser wrote:
I_am_Tosk wrote:


Uh, I fixed the pw within an hour or so.... Never had one apart
before. And as to wrenching, don't be a douchbag pig boy, Jessica and
I do all the work on the bike. We did a top end with piston, rings,
valves (shop cut valve seats and honed piston) and a few other minor
parts. She did 90% of the work with me offering guidance on spoooging
the thing with oil and I used the torque wrench. She did the rest from
sliding the cylinder over the piston, to lining up the timing chain
and cams. The thing starts first kick, I am very proud of her and we
saved almost 600 bucks doing the job ourselves... Now, back to the
filter with you pig boy, go clean your yard...


Cool. I love doing top ends!
Nice when she fires right up too!
Don't expect the fleabaggers to understand this!

Those so called fleabaggers don't have any appreciation for the
satisfaction do it yourselfers get from completeing a task without
having to pay someone to do it.

It was comical... The two of us in full panic attack mode for about 4
hours But we did it, and it's been running fine, starting with a kick
or two for over a week now and that's a lot of engine on time for us...

--
Team Rowdy Mouse, Banned from the Mall for life!

On 7/27/11 11:17 AM, I_am_Tosk wrote:
In aweb.com, "not a
says...

On 7/27/2011 9:22 AM, basskisser wrote:
I_am_Tosk wrote:


Uh, I fixed the pw within an hour or so.... Never had one apart
before. And as to wrenching, don't be a douchbag pig boy, Jessica and
I do all the work on the bike. We did a top end with piston, rings,
valves (shop cut valve seats and honed piston) and a few other minor
parts. She did 90% of the work with me offering guidance on spoooging
the thing with oil and I used the torque wrench. She did the rest from
sliding the cylinder over the piston, to lining up the timing chain
and cams. The thing starts first kick, I am very proud of her and we
saved almost 600 bucks doing the job ourselves... Now, back to the
filter with you pig boy, go clean your yard...


Cool. I love doing top ends!
Nice when she fires right up too!
Don't expect the fleabaggers to understand this!

Those so called fleabaggers don't have any appreciation for the
satisfaction do it yourselfers get from completeing a task without
having to pay someone to do it.

It was comical... The two of us in full panic attack mode for about 4
hours But we did it, and it's been running fine, starting with a kick
or two for over a week now and that's a lot of engine on time for us...



Tosk conversing with the ID spoofer as if he isn't the ID spoofer and of
course, is being played. Priceless.

On 7/27/11 9:15 AM, Florida Jim wrote:
On 7/27/2011 8:49 AM, North Star wrote:
On Jul 27, 8:56 am, wrote:
On 7/27/11 2:51 AM, I_am_Tosk wrote:

In article84674639-d842-4517-be66-bfd1ae004e89
@e40g2000yqn.googlegroups.com, says...

On Jul 26, 6:43 pm, wrote:
Enough said right there!

Oh look, it's Loogy......

Uh, no... It's Harry. To many of us have been ignoring him so he is
starting the cycle of destruction again...

Oh, and once again the moron who claims to be a network maven who
operates an internet services company proves he knows no more about the
internet than he does about "wrenching" a winning motorbike.

Wrenching a motorbike???
He couldn't figure out what was wrong with a pressure washer.
Some mechanic.............. he must get his mechanical advice from
JohnnyH

Well then, JohhnyH must have steered him in the right direction since
the problem was reported resolved. Don't you wish your mentor knew
something about anything?


Not only are a an idiot, but you don't have the balls to post under your
real name and email address. Coward.

On 27/07/2011 4:21 AM, X-Man wrote:
On 7/27/11 2:51 AM, I_am_Tosk wrote:
In article84674639-d842-4517-be66-bfd1ae004e89
@e40g2000yqn.googlegroups.com, says...

On Jul 26, 6:43 pm, wrote:
Enough said right there!

Oh look, it's Loogy......

Uh, no... It's Harry. To many of us have been ignoring him so he is
starting the cycle of destruction again...


No, **** for brains, it isn't Harry. Gawd, you are a dopey dupe.
As for the Cycle of Destruction, that's what your alleged racing team
rides.

Take your meds harry.
--
Obama, enslaving Americans with debt-tax slavery for a spending binge.
Doesn't even borrow real money, Bernanke just creates it like a
counterfeiter. .

On 7/27/2011 11:43 AM, Canuck57 wrote:
On 27/07/2011 4:21 AM, X-Man wrote:
On 7/27/11 2:51 AM, I_am_Tosk wrote:
In article84674639-d842-4517-be66-bfd1ae004e89
@e40g2000yqn.googlegroups.com, says...

On Jul 26, 6:43 pm, wrote:
Enough said right there!

Oh look, it's Loogy......

Uh, no... It's Harry. To many of us have been ignoring him so he is
starting the cycle of destruction again...


No, **** for brains, it isn't Harry. Gawd, you are a dopey dupe.
As for the Cycle of Destruction, that's what your alleged racing team
rides.

Take your meds harry.

Methinks we have another "Paul@byc".

Naw, Harry always posts under his own name.