For iLoogy/iBoaterer/iMoron: Reusing Label Sheets a No-No
 

Here you go, moron...right from HP itself:

http://tinyurl.com/9q6bvz4

"Do not feed a sheet of labels through the printer more than once. The
adhesive backing is designed for one pass through the printer."



--
I'm a liberal because the militant fundamentalist ignorant
science-denying religious xenophobic corporate oligarchy of modern
Republican conservatism just doesn't work for me or my country.

For iLoogy/iBoaterer/iMoron: Reusing Label Sheets a No-No
 

In article , dump-on-
says...

Here you go, moron...right from HP itself:

http://tinyurl.com/9q6bvz4

"Do not feed a sheet of labels through the printer more than once. The
adhesive backing is designed for one pass through the printer."

You stupid old fool! You do realize that's for a LAZER printer, correct?
Do you not have an ink jet that you claimed was for photos? Also, do you
realize that plain old paper jams also? Do you not want to put paper in
your lazer printer for fear of a jam that involves nothing more than
taking the toner pack out, removing the jam, and going on? Also, if you
read below, the adhesive should be stable to 200 degrees, the
temperature of the fuser, therefore why would the labels come off? You
need to learn to think instead of google.

For iLoogy/iBoaterer/iMoron: Reusing Label Sheets a No-No
 

On 8/12/12 12:01 PM, iBoaterer wrote:
In article , dump-on-
says...

Here you go, moron...right from HP itself:

http://tinyurl.com/9q6bvz4

"Do not feed a sheet of labels through the printer more than once. The
adhesive backing is designed for one pass through the printer."

You stupid old fool! You do realize that's for a LAZER printer, correct?
Do you not have an ink jet that you claimed was for photos? Also, do you
realize that plain old paper jams also? Do you not want to put paper in
your lazer printer for fear of a jam that involves nothing more than
taking the toner pack out, removing the jam, and going on? Also, if you
read below, the adhesive should be stable to 200 degrees, the
temperature of the fuser, therefore why would the labels come off? You
need to learn to think instead of google.



I do have an EPSON ink jet printer. It's an R1900, which I use strictly
for photos. As I stated, my main printer is a laser printer and, as I
stated, HP says don't feed labels through a laser printer more than once.

Nice try at a recovery, though, moron. The cite I offered was off the HP
website, not something I googled.

You stepped in it once again, and once again showed the wisdom of
ignoring your advice.

I use my label printer for printing...labels.

--
I'm a liberal because the militant fundamentalist ignorant
science-denying religious xenophobic corporate oligarchy of modern
Republican conservatism just doesn't work for me or my country.

For iLoogy/iBoaterer/iMoron: Reusing Label Sheets a No-No
 

On 8/12/12 11:57 AM, wrote:
On Sun, 12 Aug 2012 11:29:20 -0400, X ` Man
wrote:

Here you go, moron...right from HP itself:

http://tinyurl.com/9q6bvz4

"Do not feed a sheet of labels through the printer more than once. The
adhesive backing is designed for one pass through the printer."

I hate the idea of running labels through a laser printer once, but
maybe that is because I used to have to fix the damage it can cause.

I still keep an old LQ 24 pin printer around for printing labels but
it has been so long that I needed more than a couple at a time that I
imagine the ink is bad in the ribbons I have. For a "one off" label, I
print it on regular paper and seal in on the box with clear packing
tape.
That is a better label anyway.


I don't much like running sticky labels through a laser printer, either.

--
I'm a liberal because the militant fundamentalist ignorant
science-denying religious xenophobic corporate oligarchy of modern
Republican conservatism just doesn't work for me or my country.

For iLoogy/iBoaterer/iMoron: Reusing Label Sheets a No-No
 

On 8/12/2012 12:01 PM, iBoaterer wrote:
In article , dump-on-
says...

Here you go, moron...right from HP itself:

http://tinyurl.com/9q6bvz4

"Do not feed a sheet of labels through the printer more than once. The
adhesive backing is designed for one pass through the printer."

You stupid old fool! You do realize that's for a LAZER printer, correct?
Do you not have an ink jet that you claimed was for photos? Also, do you
realize that plain old paper jams also? Do you not want to put paper in
your lazer printer for fear of a jam that involves nothing more than
taking the toner pack out, removing the jam, and going on? Also, if you
read below, the adhesive should be stable to 200 degrees, the
temperature of the fuser, therefore why would the labels come off? You
need to learn to think instead of google.

Amazing. HP stated that If you decide to use label sheets, one of the
characteristics they should have is adhesive stability to 200f.

Are your labels safe to use, fool?

Oh! I would strongly recommend you don't use an inkjet to male labels
unles you are prepared to cover them with clear waterproof tape.

For iLoogy/iBoaterer/iMoron: Reusing Label Sheets a No-No
 

On Aug 12, 1:28*pm, Meyer wrote:
On 8/12/2012 12:01 PM, iBoaterer wrote:







In article , dump-on-
says...

Here you go, moron...right from HP itself:

http://tinyurl.com/9q6bvz4

"Do not feed a sheet of labels through the printer more than once. The
adhesive backing is designed for one pass through the printer."

You stupid old fool! You do realize that's for a LAZER printer, correct?
Do you not have an ink jet that you claimed was for photos? Also, do you
realize that plain old paper jams also? Do you not want to put paper in
your lazer printer for fear of a jam that involves nothing more than
taking the toner pack out, removing the jam, and going on? Also, if you
read below, the adhesive should be stable to 200 degrees, the
temperature of the fuser, therefore why would the labels come off? You
need to learn to think instead of google.

Amazing. HP stated that If you decide to use label sheets, one of the
characteristics they should have is adhesive stability to 200f.

Are your labels safe to use, fool?

Oh! I would strongly recommend you don't use an inkjet to male labels
unles you are prepared to cover them with clear waterproof tape.

Huh....how does one "male labels"?

For iLoogy/iBoaterer/iMoron: Reusing Label Sheets a No-No
 

On 8/12/2012 12:44 PM, North Star wrote:
On Aug 12, 1:28 pm, Meyer wrote:
On 8/12/2012 12:01 PM, iBoaterer wrote:







In article , dump-on-
says...

Here you go, moron...right from HP itself:

http://tinyurl.com/9q6bvz4

"Do not feed a sheet of labels through the printer more than once. The
adhesive backing is designed for one pass through the printer."

You stupid old fool! You do realize that's for a LAZER printer, correct?
Do you not have an ink jet that you claimed was for photos? Also, do you
realize that plain old paper jams also? Do you not want to put paper in
your lazer printer for fear of a jam that involves nothing more than
taking the toner pack out, removing the jam, and going on? Also, if you
read below, the adhesive should be stable to 200 degrees, the
temperature of the fuser, therefore why would the labels come off? You
need to learn to think instead of google.

Amazing. HP stated that If you decide to use label sheets, one of the
characteristics they should have is adhesive stability to 200f.

Are your labels safe to use, fool?

Oh! I would strongly recommend you don't use an inkjet to male labels
unles you are prepared to cover them with clear waterproof tape.

Huh....how does one "male labels"?

On a "lazer"printer. You missed that one dummy.

For iLoogy/iBoaterer/iMoron: Reusing Label Sheets a No-No
 

In article ,
says...

On Sun, 12 Aug 2012 11:29:20 -0400, X ` Man
wrote:

Here you go, moron...right from HP itself:

http://tinyurl.com/9q6bvz4

"Do not feed a sheet of labels through the printer more than once. The
adhesive backing is designed for one pass through the printer."

I hate the idea of running labels through a laser printer once, but
maybe that is because I used to have to fix the damage it can cause.

I still keep an old LQ 24 pin printer around for printing labels but
it has been so long that I needed more than a couple at a time that I
imagine the ink is bad in the ribbons I have. For a "one off" label, I
print it on regular paper and seal in on the box with clear packing
tape.
That is a better label anyway.

I've had no problem running sheets of labels through an inkjet printer
multiple times. I can't even think of the last time I had any sort of
paper jamb.

For iLoogy/iBoaterer/iMoron: Reusing Label Sheets a No-No
 

In article , dump-on-
says...

On 8/12/12 12:01 PM, iBoaterer wrote:
In article , dump-on-
says...

Here you go, moron...right from HP itself:

http://tinyurl.com/9q6bvz4

"Do not feed a sheet of labels through the printer more than once. The
adhesive backing is designed for one pass through the printer."

You stupid old fool! You do realize that's for a LAZER printer, correct?
Do you not have an ink jet that you claimed was for photos? Also, do you
realize that plain old paper jams also? Do you not want to put paper in
your lazer printer for fear of a jam that involves nothing more than
taking the toner pack out, removing the jam, and going on? Also, if you
read below, the adhesive should be stable to 200 degrees, the
temperature of the fuser, therefore why would the labels come off? You
need to learn to think instead of google.



I do have an EPSON ink jet printer. It's an R1900, which I use strictly
for photos. As I stated, my main printer is a laser printer and, as I
stated, HP says don't feed labels through a laser printer more than once.

Nice try at a recovery, though, moron. The cite I offered was off the HP
website, not something I googled.

Nothing to do with recovery, asshat. You are stupid and can't think for
yourself.

You stepped in it once again, and once again showed the wisdom of
ignoring your advice.

Nope, I can't even remember the last time I had a paper jamb, labels or
plain paper in my inkjet. I run used label sheets through it on a daily
basis.

For iLoogy/iBoaterer/iMoron: Reusing Label Sheets a No-No
 

On 8/12/12 2:26 PM, iBoaterer wrote:
In article ,
says...

On Sun, 12 Aug 2012 11:29:20 -0400, X ` Man
wrote:

Here you go, moron...right from HP itself:

http://tinyurl.com/9q6bvz4

"Do not feed a sheet of labels through the printer more than once. The
adhesive backing is designed for one pass through the printer."

I hate the idea of running labels through a laser printer once, but
maybe that is because I used to have to fix the damage it can cause.

I still keep an old LQ 24 pin printer around for printing labels but
it has been so long that I needed more than a couple at a time that I
imagine the ink is bad in the ribbons I have. For a "one off" label, I
print it on regular paper and seal in on the box with clear packing
tape.
That is a better label anyway.

I've had no problem running sheets of labels through an inkjet printer
multiple times. I can't even think of the last time I had any sort of
paper jamb.



The original point, which, of course, you misunderstood, was about laser
printers, not inkjet printers. Now, I have no knowledge of whether
reusing label sheets screws up an inkjet printer, but, then, I only use
my inkjet printer to print on photo paper.

Next time, read before you drool.

--
I'm a liberal because the militant fundamentalist ignorant
science-denying religious xenophobic corporate oligarchy of modern
Republican conservatism just doesn't work for me or my country.

For iLoogy/iBoaterer/iMoron: Reusing Label Sheets a No-No
 

On 8/12/12 2:28 PM, iBoaterer wrote:
In article , dump-on-
says...

On 8/12/12 12:01 PM, iBoaterer wrote:
In article , dump-on-
says...

Here you go, moron...right from HP itself:

http://tinyurl.com/9q6bvz4

"Do not feed a sheet of labels through the printer more than once. The
adhesive backing is designed for one pass through the printer."

You stupid old fool! You do realize that's for a LAZER printer, correct?
Do you not have an ink jet that you claimed was for photos? Also, do you
realize that plain old paper jams also? Do you not want to put paper in
your lazer printer for fear of a jam that involves nothing more than
taking the toner pack out, removing the jam, and going on? Also, if you
read below, the adhesive should be stable to 200 degrees, the
temperature of the fuser, therefore why would the labels come off? You
need to learn to think instead of google.



I do have an EPSON ink jet printer. It's an R1900, which I use strictly
for photos. As I stated, my main printer is a laser printer and, as I
stated, HP says don't feed labels through a laser printer more than once.

Nice try at a recovery, though, moron. The cite I offered was off the HP
website, not something I googled.

Nothing to do with recovery, asshat. You are stupid and can't think for
yourself.

You stepped in it once again, and once again showed the wisdom of
ignoring your advice.

Nope, I can't even remember the last time I had a paper jamb, labels or
plain paper in my inkjet. I run used label sheets through it on a daily
basis.





Uh, when Hewlett-Packard says *not* to do something with your laser
printer, I take that as advice worth taking. HP has lots of "cred" in
the laser printer business. You, on the other hand, have no cred in
anything.

--
I'm a liberal because the militant fundamentalist ignorant
science-denying religious xenophobic corporate oligarchy of modern
Republican conservatism just doesn't work for me or my country.

For iLoogy/iBoaterer/iMoron: Reusing Label Sheets a No-No
 

In article , dump-on-
says...

On 8/12/12 2:28 PM, iBoaterer wrote:
In article , dump-on-
says...

On 8/12/12 12:01 PM, iBoaterer wrote:
In article , dump-on-
says...

Here you go, moron...right from HP itself:

http://tinyurl.com/9q6bvz4

"Do not feed a sheet of labels through the printer more than once. The
adhesive backing is designed for one pass through the printer."

You stupid old fool! You do realize that's for a LAZER printer, correct?
Do you not have an ink jet that you claimed was for photos? Also, do you
realize that plain old paper jams also? Do you not want to put paper in
your lazer printer for fear of a jam that involves nothing more than
taking the toner pack out, removing the jam, and going on? Also, if you
read below, the adhesive should be stable to 200 degrees, the
temperature of the fuser, therefore why would the labels come off? You
need to learn to think instead of google.



I do have an EPSON ink jet printer. It's an R1900, which I use strictly
for photos. As I stated, my main printer is a laser printer and, as I
stated, HP says don't feed labels through a laser printer more than once.

Nice try at a recovery, though, moron. The cite I offered was off the HP
website, not something I googled.

Nothing to do with recovery, asshat. You are stupid and can't think for
yourself.

You stepped in it once again, and once again showed the wisdom of
ignoring your advice.

Nope, I can't even remember the last time I had a paper jamb, labels or
plain paper in my inkjet. I run used label sheets through it on a daily
basis.





Uh, when Hewlett-Packard says *not* to do something with your laser
printer, I take that as advice worth taking. HP has lots of "cred" in
the laser printer business. You, on the other hand, have no cred in
anything.

Where you aren't thinking is your position that all printers are laser
printers. Also, why on earth would HP turn around and say that IF you
use labels, make sure the glue can take the fuser heat???

For iLoogy/iBoaterer/iMoron: Reusing Label Sheets a No-No
 

In article , dump-on-
says...

On 8/12/12 2:26 PM, iBoaterer wrote:
In article ,
says...

On Sun, 12 Aug 2012 11:29:20 -0400, X ` Man
wrote:

Here you go, moron...right from HP itself:

http://tinyurl.com/9q6bvz4

"Do not feed a sheet of labels through the printer more than once. The
adhesive backing is designed for one pass through the printer."

I hate the idea of running labels through a laser printer once, but
maybe that is because I used to have to fix the damage it can cause.

I still keep an old LQ 24 pin printer around for printing labels but
it has been so long that I needed more than a couple at a time that I
imagine the ink is bad in the ribbons I have. For a "one off" label, I
print it on regular paper and seal in on the box with clear packing
tape.
That is a better label anyway.

I've had no problem running sheets of labels through an inkjet printer
multiple times. I can't even think of the last time I had any sort of
paper jamb.



The original point, which, of course, you misunderstood, was about laser
printers, not inkjet printers. Now, I have no knowledge of whether
reusing label sheets screws up an inkjet printer, but, then, I only use
my inkjet printer to print on photo paper.

Next time, read before you drool.

No, there was no mention of what printer you would use besides the label
printer. YOU changed it to laser only when you googled.

For iLoogy/iBoaterer/iMoron: Reusing Label Sheets a No-No
 

On 8/12/12 3:10 PM, iBoaterer wrote:
In article , dump-on-
says...

On 8/12/12 2:26 PM, iBoaterer wrote:
In article ,
says...

On Sun, 12 Aug 2012 11:29:20 -0400, X ` Man
wrote:

Here you go, moron...right from HP itself:

http://tinyurl.com/9q6bvz4

"Do not feed a sheet of labels through the printer more than once. The
adhesive backing is designed for one pass through the printer."

I hate the idea of running labels through a laser printer once, but
maybe that is because I used to have to fix the damage it can cause.

I still keep an old LQ 24 pin printer around for printing labels but
it has been so long that I needed more than a couple at a time that I
imagine the ink is bad in the ribbons I have. For a "one off" label, I
print it on regular paper and seal in on the box with clear packing
tape.
That is a better label anyway.

I've had no problem running sheets of labels through an inkjet printer
multiple times. I can't even think of the last time I had any sort of
paper jamb.



The original point, which, of course, you misunderstood, was about laser
printers, not inkjet printers. Now, I have no knowledge of whether
reusing label sheets screws up an inkjet printer, but, then, I only use
my inkjet printer to print on photo paper.

Next time, read before you drool.

No, there was no mention of what printer you would use besides the label
printer. YOU changed it to laser only when you googled.



And once again you are exhibiting your inability to move on...



--
I'm a liberal because the militant fundamentalist ignorant
science-denying religious xenophobic corporate oligarchy of modern
Republican conservatism just doesn't work for me or my country.

For iLoogy/iBoaterer/iMoron: Reusing Label Sheets a No-No
 

On 8/12/2012 1:01 PM, Meyer wrote:
On 8/12/2012 12:44 PM, North Star wrote:
On Aug 12, 1:28 pm, Meyer wrote:
On 8/12/2012 12:01 PM, iBoaterer wrote:







In article , dump-on-
says...

Here you go, moron...right from HP itself:

http://tinyurl.com/9q6bvz4

"Do not feed a sheet of labels through the printer more than once. The
adhesive backing is designed for one pass through the printer."

You stupid old fool! You do realize that's for a LAZER printer,
correct?
Do you not have an ink jet that you claimed was for photos? Also, do
you
realize that plain old paper jams also? Do you not want to put paper in
your lazer printer for fear of a jam that involves nothing more than
taking the toner pack out, removing the jam, and going on? Also, if you
read below, the adhesive should be stable to 200 degrees, the
temperature of the fuser, therefore why would the labels come off? You
need to learn to think instead of google.

Amazing. HP stated that If you decide to use label sheets, one of the
characteristics they should have is adhesive stability to 200f.

Are your labels safe to use, fool?

Oh! I would strongly recommend you don't use an inkjet to male labels
unles you are prepared to cover them with clear waterproof tape.

Huh....how does one "male labels"?

On a "lazer"printer. You missed that one dummy.

Was bonnie really so stupid he couldn't figure out what he meant??? What
a dope..

For iLoogy/iBoaterer/iMoron: Reusing Label Sheets a No-No
 

On Aug 12, 7:14*pm, JustWait wrote:
On 8/12/2012 1:01 PM, Meyer wrote:





On 8/12/2012 12:44 PM, North Star wrote:
On Aug 12, 1:28 pm, Meyer wrote:
On 8/12/2012 12:01 PM, iBoaterer wrote:

In article , dump-on-
says...

Here you go, moron...right from HP itself:

http://tinyurl.com/9q6bvz4

"Do not feed a sheet of labels through the printer more than once. The
adhesive backing is designed for one pass through the printer."

You stupid old fool! You do realize that's for a LAZER printer,
correct?
Do you not have an ink jet that you claimed was for photos? Also, do
you
realize that plain old paper jams also? Do you not want to put paper in
your lazer printer for fear of a jam that involves nothing more than
taking the toner pack out, removing the jam, and going on? Also, if you
read below, the adhesive should be stable to 200 degrees, the
temperature of the fuser, therefore why would the labels come off? You
need to learn to think instead of google.

Amazing. HP stated that If you decide to use label sheets, one of the
characteristics they should have is adhesive stability to 200f.

Are your labels safe to use, fool?

Oh! I would strongly recommend you don't use an inkjet to male labels
unles you are prepared to cover them with clear waterproof tape.

Huh....how does one "male labels"?

On a "lazer"printer. You missed that one dummy.

Was bonnie really so stupid he couldn't figure out what he meant??? What
a dope..

How's that new job selling t-shirts going? Don't dispair, at least
you're gainfully employed for the first time in a few years.

For iLoogy/iBoaterer/iMoron: Reusing Label Sheets a No-No
 

On 8/12/12 8:31 PM, North Star wrote:
On Aug 12, 7:14 pm, JustWait wrote:
On 8/12/2012 1:01 PM, Meyer wrote:





On 8/12/2012 12:44 PM, North Star wrote:
On Aug 12, 1:28 pm, Meyer wrote:
On 8/12/2012 12:01 PM, iBoaterer wrote:

In article , dump-on-
says...

Here you go, moron...right from HP itself:

http://tinyurl.com/9q6bvz4

"Do not feed a sheet of labels through the printer more than once. The
adhesive backing is designed for one pass through the printer."

You stupid old fool! You do realize that's for a LAZER printer,
correct?
Do you not have an ink jet that you claimed was for photos? Also, do
you
realize that plain old paper jams also? Do you not want to put paper in
your lazer printer for fear of a jam that involves nothing more than
taking the toner pack out, removing the jam, and going on? Also, if you
read below, the adhesive should be stable to 200 degrees, the
temperature of the fuser, therefore why would the labels come off? You
need to learn to think instead of google.

Amazing. HP stated that If you decide to use label sheets, one of the
characteristics they should have is adhesive stability to 200f.

Are your labels safe to use, fool?

Oh! I would strongly recommend you don't use an inkjet to male labels
unles you are prepared to cover them with clear waterproof tape.

Huh....how does one "male labels"?

On a "lazer"printer. You missed that one dummy.

Was bonnie really so stupid he couldn't figure out what he meant??? What
a dope..

How's that new job selling t-shirts going? Don't dispair, at least
you're gainfully employed for the first time in a few years.


Doubtful.

--
I'm a liberal because the militant fundamentalist ignorant
science-denying religious xenophobic corporate oligarchy of modern
Republican conservatism just doesn't work for me or my country.

For iLoogy/iBoaterer/iMoron: Reusing Label Sheets a No-No
 

On Aug 12, 10:01*pm, X ` Man dump-on-conservati...@anywhere-you-
can.com wrote:
On 8/12/12 8:31 PM, North Star wrote:









On Aug 12, 7:14 pm, JustWait wrote:
On 8/12/2012 1:01 PM, Meyer wrote:

On 8/12/2012 12:44 PM, North Star wrote:
On Aug 12, 1:28 pm, Meyer wrote:
On 8/12/2012 12:01 PM, iBoaterer wrote:

In article , dump-on-
says...

Here you go, moron...right from HP itself:

http://tinyurl.com/9q6bvz4

"Do not feed a sheet of labels through the printer more than once.. The
adhesive backing is designed for one pass through the printer."

You stupid old fool! You do realize that's for a LAZER printer,
correct?
Do you not have an ink jet that you claimed was for photos? Also, do
you
realize that plain old paper jams also? Do you not want to put paper in
your lazer printer for fear of a jam that involves nothing more than
taking the toner pack out, removing the jam, and going on? Also, if you
read below, the adhesive should be stable to 200 degrees, the
temperature of the fuser, therefore why would the labels come off? You
need to learn to think instead of google.

Amazing. HP stated that If you decide to use label sheets, one of the
characteristics they should have is adhesive stability to 200f.

Are your labels safe to use, fool?

Oh! I would strongly recommend you don't use an inkjet to male labels
unles you are prepared to cover them with clear waterproof tape.

Huh....how does one "male labels"?

On a "lazer"printer. You missed that one dummy.

Was bonnie really so stupid he couldn't figure out what he meant??? What
a dope..

How's that new job selling t-shirts going? *Don't dispair, at least
you're gainfully employed for the first time in a few years.

Doubtful.

--
I'm a liberal because the militant fundamentalist ignorant
science-denying religious xenophobic corporate oligarchy of modern
Republican conservatism just doesn't work for me or my country.

Now that you mention it......we only have his word that he is employed
and he's a well known pathological liar.

For iLoogy/iBoaterer/iMoron: Reusing Label Sheets a No-No
 

On 8/12/12 9:11 PM, North Star wrote:
On Aug 12, 10:01 pm, X ` Man dump-on-conservati...@anywhere-you-
can.com wrote:
On 8/12/12 8:31 PM, North Star wrote:









On Aug 12, 7:14 pm, JustWait wrote:
On 8/12/2012 1:01 PM, Meyer wrote:

On 8/12/2012 12:44 PM, North Star wrote:
On Aug 12, 1:28 pm, Meyer wrote:
On 8/12/2012 12:01 PM, iBoaterer wrote:

In article , dump-on-
says...

Here you go, moron...right from HP itself:

http://tinyurl.com/9q6bvz4

"Do not feed a sheet of labels through the printer more than once. The
adhesive backing is designed for one pass through the printer."

You stupid old fool! You do realize that's for a LAZER printer,
correct?
Do you not have an ink jet that you claimed was for photos? Also, do
you
realize that plain old paper jams also? Do you not want to put paper in
your lazer printer for fear of a jam that involves nothing more than
taking the toner pack out, removing the jam, and going on? Also, if you
read below, the adhesive should be stable to 200 degrees, the
temperature of the fuser, therefore why would the labels come off? You
need to learn to think instead of google.

Amazing. HP stated that If you decide to use label sheets, one of the
characteristics they should have is adhesive stability to 200f.

Are your labels safe to use, fool?

Oh! I would strongly recommend you don't use an inkjet to male labels
unles you are prepared to cover them with clear waterproof tape.

Huh....how does one "male labels"?

On a "lazer"printer. You missed that one dummy.

Was bonnie really so stupid he couldn't figure out what he meant??? What
a dope..

How's that new job selling t-shirts going? Don't dispair, at least
you're gainfully employed for the first time in a few years.

Doubtful.

--
I'm a liberal because the militant fundamentalist ignorant
science-denying religious xenophobic corporate oligarchy of modern
Republican conservatism just doesn't work for me or my country.

Now that you mention it......we only have his word that he is employed
and he's a well known pathological liar.


If I were qualified to diagnose, I'd guess he suffers from Schizotypal
Personality Disorder, but since I am not, I have to satisfy myself with
calling him bat**** crazy.

--
I'm a liberal because the militant fundamentalist ignorant
science-denying religious xenophobic corporate oligarchy of modern
Republican conservatism just doesn't work for me or my country.