Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Larry D Gibbs
 
Posts: n/a
Default MerCrusier 3.0 Power Trim Switch Question?

I am buying a 2001 Bayliner Classic Capri 1950 with the Merc 3.0 engine. I
noticed that lowering the propeller that it went down but would not return
to the up position without useing the trailer switch. I am not sure how it
is supposed to work. We probably did not lower the propeller all the way
down because when we noticed the up button didn't work we didn't go any
lower. Does the propeller need to be in the lowest position before the up
part of the switch works or is the swith bad. If it is bad is it expensive
to fix or is it a do it yourself job? I am picking the boat up in a day or
so.


  #2   Report Post  
tony thomas
 
Posts: n/a
Default

The down button will lower the outdrive from full up to all the way down.
The up button will raise the outdrive from all the way down to approx 1/2
way.
To get the outdrive above this position you have to use the trailer switch.
This is a safety device to keep from tearing up the gimbal by running the
outdrive at too high an angle.
If it does not work chances are it is just the switch on the control as
everything else is the same in terms of operation of trim pump, relays,
etc...
Switch is fairly easy to replace - just be careful and the wires are
soldered (at least the ones I have ever pulled out).

--
Tony
my boats and cars at http://t.thomas.home.mchsi.com
"Larry D Gibbs" wrote in message
...
I am buying a 2001 Bayliner Classic Capri 1950 with the Merc 3.0 engine. I
noticed that lowering the propeller that it went down but would not return
to the up position without useing the trailer switch. I am not sure how it
is supposed to work. We probably did not lower the propeller all the way
down because when we noticed the up button didn't work we didn't go any
lower. Does the propeller need to be in the lowest position before the up
part of the switch works or is the swith bad. If it is bad is it expensive
to fix or is it a do it yourself job? I am picking the boat up in a day or
so.



  #3   Report Post  
HarryKrause
 
Posts: n/a
Default

On Thu, 17 Mar 2005 18:46:47 -0800, "Larry D Gibbs"
wrote:

I am buying a 2001 Bayliner Classic Capri 1950 with the Merc 3.0 engine.


I bought two of these for my brother for his birthday last year. He
loves it.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
New owner - Question about AC power Paul General 10 August 9th 03 05:59 AM
Power Trim Gazunni General 2 July 31st 03 03:42 AM
Power Trim Gazunni General 0 July 30th 03 02:14 AM
Power Trim JTC General 0 July 29th 03 12:41 PM
Tilt / Trim switch Ronald A. Widman General 0 July 20th 03 04:51 PM


All times are GMT +1. The time now is 09:25 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017