Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
I have a Mercury 90 HP Four stroke with a max RPM (WOT): 5000-6000
With my default 19" black max (3 blade) RPM wide open is about 5900 RPM. I tested with a 17" black max and it did 6200 rpm. I expect my newly ordered Trophy Plus 17" (4 blade) to do about 6150 RPM. Is this amount of revs a problem for this engine, or should I be gentle with my right hand thus keeping it under 6000? (following question comes to mind: how accurate is my factory fitted mercury rev meter?) |
#2
![]() |
|||
|
|||
![]()
You should have gone w/ the 19". The 4 blade is going to give you more
acceleration and hole shot. Top end will be hurt a little. The diameter of a 4 blade is smaller than the 3 blade to compensate for the extra blade. In theory your rpms would not change more than 50 or so as you say. Your current speed should be about: 19 x 5900 / 1056 / 2 x .85 = 45 MPH Your new speed will be about: 17 x 6150 / 1056 / 2 x .85 = 42 MPH If you had stayed w/ the 19 you would be at 19 x 5850 / 1056 / 2 x .85 = 44 MPH The 17 will give you better acceleration but you will need to keep the engine under 6000 rpms for any extended period of time. Any way you can change the order to a 19? By the way - you should never run the engine wide open for extended periods of time. You would not run your car in second gear at 6000 rpms down the interstate. Don't do it on the river w/ your boat. -- Tony my boats and cars at http://t.thomas.home.mchsi.com - wrote in message oups.com... I have a Mercury 90 HP Four stroke with a max RPM (WOT): 5000-6000 With my default 19" black max (3 blade) RPM wide open is about 5900 RPM. I tested with a 17" black max and it did 6200 rpm. I expect my newly ordered Trophy Plus 17" (4 blade) to do about 6150 RPM. Is this amount of revs a problem for this engine, or should I be gentle with my right hand thus keeping it under 6000? (following question comes to mind: how accurate is my factory fitted mercury rev meter?) |
#3
![]() |
|||
|
|||
![]()
Thanks for your info, if i can change the order to a 19" will the
difference between the 3 and 4 blade well noticable? I dont mind spending some $$, but i want to "feel" the money I spent. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Paddling straight? | Touring | |||
2004 9.9 Mercury - 2 stroke or 4 stroke? | General | |||
Tachometer output on 50 Hp Mercury four stroke | General | |||
wtb Used 30hp or 40hp 4 stroke Mercury outboard in Ontario Canada | Marketplace | |||
Changing Spark Plugs Mercury 4 Stroke Engine | General |