Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
I'm replacing my trusty old Lowrance X65 fishfinder and am considering
a 3D unit. It seems to make so much sense...and yet it's difficult to hear a good word said for them on any Newsgroup. What's more, the comments all seem very dated and may not relate to newer technology - so what are the latest views? My impression is that a few years ago there were more 3D units on offer than now - that suggests either the market was a lot smaller than the manufacturers thought or the technology couldn't meet the market need. I'm fishing my home waters here in Scotland in the 70 - 250ft range (so all these negative comments about 3D in shallow water aren't relevant) in an area that is only lightly fished and about which there's little local knowledge of underwater features, hotspots, wrecks etc (so 3D sounds ideal). Looking at the units available only the Hummingbird Matrix 47 3D comes up and on paper it looks good. Their Matrix 37 with side-imaging looks very impressive too - who could argue with the screen shots on their website (http://www.humminbird.com/generic2.asp?ID=514)- have a look, they're incredible. But looking at Newsgroup comments about Hummingbird they come in for a slating. So what's a guy to do? What's your considered view? Hummingbird bad? 3D bad? Do I stick to 2D and keep looking at the sea bed through a pin-hole? |
#2
![]() |
|||
|
|||
![]()
it looks interesting .... I am not a fisherman but could iamgine that
just by seing the fish on the screen doesnt mean you catch them or they are stillt here by the time you get the hook down .. I see fishfinders more useful to find the fishs depth and habitat rather than the fish itself ... I heard people say these 3D / forward looking units work well, apparently commericlas use them ... but its "too easy" to catch fish .... Also consider that the actual image you will get wont look as it does on the screen ... it can be quiet a challenge to get a normal finder to read properly a 6 beam transducer may be more difficult ... Matt |
#3
![]() |
|||
|
|||
![]()
I read the web site which says effective to 100ft
You are talking of 70 to 250ft a.. Side beams are extremely narrow front to back providing "thin slices" of the bottom for high resolution imaging. b.. Side Beams look out to 240 feet, with a depth limitation of 100 feet. Save your money unless you are into hydroghraphic surveying. Keith M "Pig Sick" wrote in message ups.com... I'm replacing my trusty old Lowrance X65 fishfinder and am considering a 3D unit. It seems to make so much sense...and yet it's difficult to hear a good word said for them on any Newsgroup. What's more, the comments all seem very dated and may not relate to newer technology - so what are the latest views? My impression is that a few years ago there were more 3D units on offer than now - that suggests either the market was a lot smaller than the manufacturers thought or the technology couldn't meet the market need. I'm fishing my home waters here in Scotland in the 70 - 250ft range (so all these negative comments about 3D in shallow water aren't relevant) in an area that is only lightly fished and about which there's little local knowledge of underwater features, hotspots, wrecks etc (so 3D sounds ideal). Looking at the units available only the Hummingbird Matrix 47 3D comes up and on paper it looks good. Their Matrix 37 with side-imaging looks very impressive too - who could argue with the screen shots on their website (http://www.humminbird.com/generic2.asp?ID=514)- have a look, they're incredible. But looking at Newsgroup comments about Hummingbird they come in for a slating. So what's a guy to do? What's your considered view? Hummingbird bad? 3D bad? Do I stick to 2D and keep looking at the sea bed through a pin-hole? |
#4
![]() |
|||
|
|||
![]()
Go with 4D. Not only will it show you where the fish are, but also when
they'll be there. |
#5
![]() |
|||
|
|||
![]()
In message ws.net,
Dom writes Go with 4D. Not only will it show you where the fish are, but also when they'll be there. Would that be the sort you need a sonic screwdriver to fix? -- Steve Walker |
#6
![]() |
|||
|
|||
![]()
....and a laser wrench.
|
#7
![]() |
|||
|
|||
![]()
If you're still on the fence about 2D or 3D, this may help.
Since you're using your fishfinder for fishing a 3D unit may be of use to you. Consider what kind of fish you are targeting. If these fish seek bottom structure, then 3D may be of value to you. Trade in features you don't use for a better quality unit. Look at your current unit and figure what features you use and don't use.Dual frequency is a handy feature. Your X65 is a single frequency unit, 192 khz I think. Bottom zoom is a seldom used feature. If you're working with a budget consider buying a better quality 2D unit instead of a lesser quality, but similarly price 3D unit. If you're looking for another Lowrance, I do not believe that they make a 3D unit. Humminbird's Matrix 47 ( http://www.humminbird.com/products.asp?ID=492 ) sells for less than $500. Their new 900 series 947C ( http://www.humminbird.com/products.asp?ID=510 ) , which is color and has a built in chart plotter, goes for about to $1600. We usually can beat their prices and we ship to Europe. Let me know if you want exact prices. John Retail4Wholesale.com |
#8
![]() |
|||
|
|||
![]()
Thanks for that, John. I was just going to get a better quality 2D unit
but then I thought, wait a minute, most of the magazine articles I read are about people using their 2D units fishing over wrecks and banks that are well-known features to all and sundry in the heavily used waters they fish, mostly around England. I on the other hand am fishing in remote, seldom (if ever) fished waters around my home in Scotland (Google Earth 58degrees 1minute N, 5degrees 26minutes W), and though my father and grandfather fished these same waters before me, none of us know that much about the bottom features. The old marks don't seem to work any more and I need to go prospecting. So, I thought, what better way than to strap on a 3D? And if I want 2D mode I just flick a switch. But I seem to be the only one thinking this way, which worries me a tad. I may yet come to you for a price for the Matrix 47 - I already got a GPS. Iain |
#9
![]() |
|||
|
|||
![]() "Pig Sick" wrote in message oups.com... Thanks for that, John. I was just going to get a better quality 2D unit but then I thought, wait a minute, most of the magazine articles I read are about people using their 2D units fishing over wrecks and banks that are well-known features to all and sundry in the heavily used waters they fish, mostly around England. I on the other hand am fishing in remote, seldom (if ever) fished waters around my home in Scotland (Google Earth 58degrees 1minute N, 5degrees 26minutes W), and though my father and grandfather fished these same waters before me, none of us know that much about the bottom features. The old marks don't seem to work any more and I need to go prospecting. So, I thought, what better way than to strap on a 3D? And if I want 2D mode I just flick a switch. But I seem to be the only one thinking this way, which worries me a tad. I may yet come to you for a price for the Matrix 47 - I already got a GPS. Iain I was wondering how this nice, polite and informative discussion popped up here in wrecked.boats. Then I noticed the cross-posting. They obviously don't belong here otherwise they better start calling each other names soon. Eisboch |
#10
![]() |
|||
|
|||
![]()
On Mon, 10 Oct 2005 19:36:07 -0400, "Eisboch" wrote:
"Pig Sick" wrote in message roups.com... Thanks for that, John. I was just going to get a better quality 2D unit but then I thought, wait a minute, most of the magazine articles I read are about people using their 2D units fishing over wrecks and banks that are well-known features to all and sundry in the heavily used waters they fish, mostly around England. I on the other hand am fishing in remote, seldom (if ever) fished waters around my home in Scotland (Google Earth 58degrees 1minute N, 5degrees 26minutes W), and though my father and grandfather fished these same waters before me, none of us know that much about the bottom features. The old marks don't seem to work any more and I need to go prospecting. So, I thought, what better way than to strap on a 3D? And if I want 2D mode I just flick a switch. But I seem to be the only one thinking this way, which worries me a tad. I may yet come to you for a price for the Matrix 47 - I already got a GPS. Iain I was wondering how this nice, polite and informative discussion popped up here in wrecked.boats. Then I noticed the cross-posting. They obviously don't belong here otherwise they better start calling each other names soon. Eisboch His location is an island off the coast of Scotland, close to Baden Bay. Looks pretty on Google Earth. -- John H "The trouble with our liberal friends is not that they're ignorant: It's just that they know so much that isn't so." Ronald Reagan |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Another strip-plank question - a bit long | Boat Building | |||
Propeller efficiency question (electric) | Boat Building | |||
Other choice and counterpoise question | Electronics | |||
Exhaust question on inboard 1958 Chris Craft | Boat Building | |||
Sunday's VHF antics.....and a question.. | Electronics |