| Home |
| Search |
| Today's Posts |
|
#1
|
|||
|
|||
Older Evinrude
I have an Older 4 horse Evinrude motor. Model # CE4BRCDE that I need any
information on. Starting with the year of this model. I do have a running question & that is if I run it full speed it works fine then it starts to slow down & stalls. If you have any advice it would be greatly appreciated Thanks in Advance Stu. |
|
#2
|
|||
|
|||
|
Older Evinrude
The motor you have is a 1986 if it has been sitting for a long time make
sure the carburetor is clean take it off and ck it out also make sure your water pump is working. Scott -- This is my web site www.scott-the-boat-doctor.com "Stuart DeWolfe" wrote in message ... I have an Older 4 horse Evinrude motor. Model # CE4BRCDE that I need any information on. Starting with the year of this model. I do have a running question & that is if I run it full speed it works fine then it starts to slow down & stalls. If you have any advice it would be greatly appreciated Thanks in Advance Stu. |
|
#3
|
|||
|
|||
|
Older Evinrude
I would rebuild the fuel pump too. Those diaphragms don't like sitting
around. -- Bill Chesapeake, Va "Scott Hall" wrote in message ... The motor you have is a 1986 if it has been sitting for a long time make sure the carburetor is clean take it off and ck it out also make sure your water pump is working. Scott -- This is my web site www.scott-the-boat-doctor.com "Stuart DeWolfe" wrote in message ... I have an Older 4 horse Evinrude motor. Model # CE4BRCDE that I need any information on. Starting with the year of this model. I do have a running question & that is if I run it full speed it works fine then it starts to slow down & stalls. If you have any advice it would be greatly appreciated Thanks in Advance Stu. |
|
#4
|
|||
|
|||
|
Older Evinrude
Stuart DeWolfe wrote:
I have an Older 4 horse Evinrude motor. Model # CE4BRCDE that I need any information on. Starting with the year of this model. I do have a running question & that is if I run it full speed it works fine then it starts to slow down & stalls. If you have any advice it would be greatly appreciated Thanks in Advance Stu. Use good oil, TCW-3, mixed 50:1. It sounds like you might be a little lean. Rob |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Pair Evinrude 225 HP 25" For Sale - Cheap | General | |||
| Pair Evinrude 225 HP 25" For Sale - Cheap | General | |||
| evinrude 2+4 & 2 stroke oil question | General | |||
| Evinrude Model Year? | General | |||
| evinrude 4 HP 2 cyl runs rough | General | |||
Linear Mode
