Older Evinrude
 

I have an Older 4 horse Evinrude motor. Model # CE4BRCDE that I need any
information on. Starting with the year of this model. I do have a running
question & that is if I run it full speed it works fine then it starts to
slow down & stalls. If you have any advice it would be greatly appreciated

Thanks in Advance
Stu.

Older Evinrude
 

The motor you have is a 1986 if it has been sitting for a long time make
sure the carburetor is clean take it off and ck it out also make sure your
water pump is working.
Scott

--
This is my web site
www.scott-the-boat-doctor.com
"Stuart DeWolfe" wrote in message
...
I have an Older 4 horse Evinrude motor. Model # CE4BRCDE that I need any
information on. Starting with the year of this model. I do have a running
question & that is if I run it full speed it works fine then it starts to
slow down & stalls. If you have any advice it would be greatly appreciated

Thanks in Advance
Stu.

Older Evinrude
 

I would rebuild the fuel pump too. Those diaphragms don't like sitting
around.

--
Bill
Chesapeake, Va


"Scott Hall" wrote in message
...
The motor you have is a 1986 if it has been sitting for a long time make
sure the carburetor is clean take it off and ck it out also make sure your
water pump is working.
Scott

--
This is my web site
www.scott-the-boat-doctor.com
"Stuart DeWolfe" wrote in message
...
I have an Older 4 horse Evinrude motor. Model # CE4BRCDE that I need any
information on. Starting with the year of this model. I do have a running
question & that is if I run it full speed it works fine then it starts to
slow down & stalls. If you have any advice it would be greatly appreciated

Thanks in Advance
Stu.

Older Evinrude
 

Stuart DeWolfe wrote:

I have an Older 4 horse Evinrude motor. Model # CE4BRCDE that I need any
information on. Starting with the year of this model. I do have a running
question & that is if I run it full speed it works fine then it starts to
slow down & stalls. If you have any advice it would be greatly appreciated

Thanks in Advance
Stu.



Use good oil, TCW-3, mixed 50:1. It sounds like you might be a little lean.

Rob