Home |
Search |
Today's Posts |
#1
![]()
posted to rec.boats
|
|||
|
|||
![]()
Enroute from Seattle to Poulsbo, (to do a little "holiday" shopping),
we got hauled down by the Coast Guard in Port Madison. It was really no big deal, but I thought a few things were odd: First, I was monitoring 16 but there was no attempt to hail the boat. The CG was originally proceeding in the opposite direction, but then did a quick turn to come up along side. Second, the kids were, *kids*!. Two male and two female officers, (the female officers stayed aboard the patrol boat), but they all looked like they had graduated high school just last June. I sort of had to help the one kid through the inspection. He didn't know the name of the body of water where he had stopped us. (!) He looked really puzzled after he asked whether we had our sanitation Y valve wired shut and I told him "no". I let him stew for a few seconds before telling him we have an approved Type I MSD. He was really relieved as he continued his report. "Oh, yeah! Approved Type I MSD! Super, thanks." They looked at: 1) Documentation and ID 2) PFD's 3) oil discharge placard 4) garbage placard 5) fire extinguishers 6) horn 7) throwable devices (we carry two life rings) They made a big deal about having Chart #1 on board. (I did). They didn't even ask to see my flares........and that's a good thing as my 12-gauge flares expired the end of November 2005. :-) While the one officer followed me around the boat to check off his list, the other officer sat at the dining table and called a *lot* of personal information from my driver's license into a central data bank. I did get a warning for my horn. Every few years that electric horn gives out, and in the wet weather we have had the last few weeks it decided to crap out since the last use and just in time for the CG boarding. I think I'll look into an air horn. The CG officer did mention that if I get boarded again and the horn isn't working the CG can order me to cease operations- so I'll pick up a canned horn (which is enough to meet the requirement) while deciding about the air horn. Worst part of the experience was the 15 minute delay. Overall, the CG was very professional and polite. |
#2
![]()
posted to rec.boats
|
|||
|
|||
![]() |
#3
![]()
posted to rec.boats
|
|||
|
|||
![]() |
#4
![]()
posted to rec.boats
|
|||
|
|||
![]() |
#5
![]()
posted to rec.boats
|
|||
|
|||
![]()
Chuck,
What are the rules regarding sanitation Y valves? How do I know if I have a Type I MSD. My system has a Jabsco electric flush toilet, that dumps into a holding tank. There are two through-hulls. One is the inlet through-hull to allow sea water in for flushing. The other is the outlet through-hull that pumps out the holding tank underneath the boat. On the side walkaround, there is a pump-out cap. When you flush the toilet, it goes to the small holding tank. You then have to press a button on the rear bulkhead of the cabin to pump the waste through the outlet through-hull. If the outlet through-hull is closed, the waste pumps up through the topside pump out drain that's covered with a cap. Is that a Type I MSD? wrote in message oups.com... Enroute from Seattle to Poulsbo, (to do a little "holiday" shopping), we got hauled down by the Coast Guard in Port Madison. It was really no big deal, but I thought a few things were odd: First, I was monitoring 16 but there was no attempt to hail the boat. The CG was originally proceeding in the opposite direction, but then did a quick turn to come up along side. Second, the kids were, *kids*!. Two male and two female officers, (the female officers stayed aboard the patrol boat), but they all looked like they had graduated high school just last June. I sort of had to help the one kid through the inspection. He didn't know the name of the body of water where he had stopped us. (!) He looked really puzzled after he asked whether we had our sanitation Y valve wired shut and I told him "no". I let him stew for a few seconds before telling him we have an approved Type I MSD. He was really relieved as he continued his report. "Oh, yeah! Approved Type I MSD! Super, thanks." They looked at: 1) Documentation and ID 2) PFD's 3) oil discharge placard 4) garbage placard 5) fire extinguishers 6) horn 7) throwable devices (we carry two life rings) They made a big deal about having Chart #1 on board. (I did). They didn't even ask to see my flares........and that's a good thing as my 12-gauge flares expired the end of November 2005. :-) While the one officer followed me around the boat to check off his list, the other officer sat at the dining table and called a *lot* of personal information from my driver's license into a central data bank. I did get a warning for my horn. Every few years that electric horn gives out, and in the wet weather we have had the last few weeks it decided to crap out since the last use and just in time for the CG boarding. I think I'll look into an air horn. The CG officer did mention that if I get boarded again and the horn isn't working the CG can order me to cease operations- so I'll pick up a canned horn (which is enough to meet the requirement) while deciding about the air horn. Worst part of the experience was the 15 minute delay. Overall, the CG was very professional and polite. |
#6
![]()
posted to rec.boats
|
|||
|
|||
![]()
You have a type 3.
a.. Type I MSD's treat sewage so that the discharged effluent meets specified standards for bacteria content and contains no visible floating solids. a.. Type II MSD's are similar, but must meet a higher standard of sewage treatment. a.. Type III MSD's retain sewage for shore based disposal or discharge beyond the three mile offshore limit. "NOYB" wrote in message link.net... Chuck, What are the rules regarding sanitation Y valves? How do I know if I have a Type I MSD. My system has a Jabsco electric flush toilet, that dumps into a holding tank. There are two through-hulls. One is the inlet through-hull to allow sea water in for flushing. The other is the outlet through-hull that pumps out the holding tank underneath the boat. On the side walkaround, there is a pump-out cap. When you flush the toilet, it goes to the small holding tank. You then have to press a button on the rear bulkhead of the cabin to pump the waste through the outlet through-hull. If the outlet through-hull is closed, the waste pumps up through the topside pump out drain that's covered with a cap. Is that a Type I MSD? wrote in message oups.com... Enroute from Seattle to Poulsbo, (to do a little "holiday" shopping), we got hauled down by the Coast Guard in Port Madison. It was really no big deal, but I thought a few things were odd: First, I was monitoring 16 but there was no attempt to hail the boat. The CG was originally proceeding in the opposite direction, but then did a quick turn to come up along side. Second, the kids were, *kids*!. Two male and two female officers, (the female officers stayed aboard the patrol boat), but they all looked like they had graduated high school just last June. I sort of had to help the one kid through the inspection. He didn't know the name of the body of water where he had stopped us. (!) He looked really puzzled after he asked whether we had our sanitation Y valve wired shut and I told him "no". I let him stew for a few seconds before telling him we have an approved Type I MSD. He was really relieved as he continued his report. "Oh, yeah! Approved Type I MSD! Super, thanks." They looked at: 1) Documentation and ID 2) PFD's 3) oil discharge placard 4) garbage placard 5) fire extinguishers 6) horn 7) throwable devices (we carry two life rings) They made a big deal about having Chart #1 on board. (I did). They didn't even ask to see my flares........and that's a good thing as my 12-gauge flares expired the end of November 2005. :-) While the one officer followed me around the boat to check off his list, the other officer sat at the dining table and called a *lot* of personal information from my driver's license into a central data bank. I did get a warning for my horn. Every few years that electric horn gives out, and in the wet weather we have had the last few weeks it decided to crap out since the last use and just in time for the CG boarding. I think I'll look into an air horn. The CG officer did mention that if I get boarded again and the horn isn't working the CG can order me to cease operations- so I'll pick up a canned horn (which is enough to meet the requirement) while deciding about the air horn. Worst part of the experience was the 15 minute delay. Overall, the CG was very professional and polite. |
#7
![]()
posted to rec.boats
|
|||
|
|||
![]() wrote in message oups.com... (!) He looked really puzzled after he asked whether we had our sanitation Y valve wired shut and I told him "no". I let him stew for a few seconds before telling him we have an approved Type I MSD. Whenever a vessel equipped with a Type I or Type II MSD (these types discharge treated sewage) is operating in an area of water that has been declared a No Discharge Zone, the MSD cannot be used and must be secured to prevent discharge.When operating in a No Discharge Zone, a Type I or Type II MSD must be secured in some way to prevent discharge. Closing the seacock and padlocking, using a non-releasable wire-tie, or removing the seacock handle would be sufficient. http://www.boatsafe.com/nauticalknow...ting/4_2_f.htm Chuck, If you have a Type I or Type II MSD, the MSD must be secured with a seacock and padlocking or wire-tie. From the definitions that I've read, it appears that I have a Type III MSD...and only the Type III MSD doesn't need to be padlocked or wired shut. Your Type I MSD *does* need to be secured according to the description that I posted above. |
#8
![]()
posted to rec.boats
|
|||
|
|||
![]() |
#9
![]()
posted to rec.boats
|
|||
|
|||
![]() "Gene Kearns" wrote in message ... On Mon, 05 Dec 2005 00:40:34 GMT, "Bryan" wrote: ......I'm afraid that they'll find something missing from the mandatory list. ..... This is your Kryptonite! If you *know* beforehand what is expected of you and you can't deliver..... really, ...... in all seriousness, you shouldn't be boating.... I'm pretty obsessive about my list, but it's always a worry. After all, entropy is a hard law to fight. Bryan |
#10
![]()
posted to rec.boats
|
|||
|
|||
![]()
On Mon, 05 Dec 2005 00:40:34 GMT, "Bryan"
wrote: Of course, if they had cause then they don't need to ask my permission except out of courtesy. ========================== That's the problem. The USCG has long standing governmental authorization to board any vessel at any time without probable cause - even in international waters. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
"Lodged under the barge?" | General | |||
Here's hoping they catch this character........ | General | |||
So where is...................... | General | |||
Safest Year on Record......... | General | |||
Coast Guard turning over lighthouse operation to local govts?? | General |