BoatBanter.com

BoatBanter.com (https://www.boatbanter.com/)
-   General (https://www.boatbanter.com/general/)
-   -   Cooling System (https://www.boatbanter.com/general/79818-cooling-system.html)

keithbrumbelow April 11th 07 11:12 PM

Cooling System
 
I have a Yamaha 115 , When using the flush system will the water come out of
the pee holes?


Dan April 12th 07 12:43 AM

Cooling System
 
keithbrumbelow wrote:
I have a Yamaha 115 , When using the flush system will the water come out of
the pee holes?


If you have a 115 four stroke your hose will cover the pee hole. If you
use muffs, you will get a stream.

Dan

keithbrumbelow via BoatKB.com April 12th 07 03:08 PM

Cooling System
 
Thanks for the reply, When I attach the muffs there is no stream either , we
changed the pump and the themostat but that had no effect either.what do
you recommend?

Dan wrote:
I have a Yamaha 115 , When using the flush system will the water come out of
the pee holes?


If you have a 115 four stroke your hose will cover the pee hole. If you
use muffs, you will get a stream.

Dan


--
Message posted via BoatKB.com
http://www.boatkb.com/Uwe/Forums.aspx/boats/200704/1


Dan April 13th 07 01:50 AM

Cooling System
 
keithbrumbelow via BoatKB.com wrote:
Thanks for the reply, When I attach the muffs there is no stream either , we
changed the pump and the themostat but that had no effect either.what do
you recommend?

Dan wrote:
I have a Yamaha 115 , When using the flush system will the water come out of
the pee holes?

If you have a 115 four stroke your hose will cover the pee hole. If you
use muffs, you will get a stream.

Dan




By pump do you mean impeller? If that was also replaced you might try a
new set of muffs. I have better luck with the type where the hose
attaches to the back and feeds water to both sides. The single-sided
type doesn't work well on my 115 for some reason.

Dan

keithbrumbelow via BoatKB.com April 13th 07 04:12 PM

Cooling System
 
Dan wrote:
Thanks for the reply, When I attach the muffs there is no stream either , we
changed the pump and the themostat but that had no effect either.what do

[quoted text clipped - 6 lines]

Dan


By pump do you mean impeller? If that was also replaced you might try a
new set of muffs. I have better luck with the type where the hose
attaches to the back and feeds water to both sides. The single-sided
type doesn't work well on my 115 for some reason.

Dan

Thanks Again, After replacing the impeller and the thermostat we were still
getting no stream and we have the two sided muffs , we learned that if the
motor has been out of the water for a while ( year and a half) that you have
to put it under a load to reprime the cooling system. We took it to the lake
yesterday and it streams like a new motor. So we are back to fishing, I
appreciate your comments-Keith

--
Message posted via BoatKB.com
http://www.boatkb.com/Uwe/Forums.aspx/boats/200704/1



All times are GMT +1. The time now is 07:23 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com