Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
We sold our boat last year and now suffering withdrawls. I've been looking at
the next one and like the looks of those ole Pachangas. What would be any faults or handling issues they may have? I'm thinking maybe a 27' with twin 350 mercs. Any hull problems? And why would such a good looking boat not still be manufactured by Sea Ray. Thanks |
#2
![]() |
|||
|
|||
![]()
I had an '89, beautiful boat in my opinion, but I'm afraid not constructed
very well. I had cracks in the hull sides where the bulkheads were that cost me a lot of $$$ to fix. I also had my aluminum danforth style anchor stored in the well at the bow, the anchor dug a hole through the inner layer of glass and exposed a layer of "putty" used in the lay-up. (see yachtsurvey.com for a description of this stuff) This stuff was dry, but soft, you could dig it out with a screwdriver with no effort. Apparently a cheap way to core a mass produced piece of junk. SeaRay still uses this stuff as far as I know. I also had a couple of rattles that I could not chase down as well a loud crack every time I came off a wave hard. The ride was awful, Lake St Clair has a lot of boat chop, the Pachanga rattled your teeth the whole day long. If you are looking for something like that, I would look for a Wellcraft Nova II, much better constructed. Yes a good looking boat but I think they found that performance boaters are a little harder on their boats than cruisers. Paul .. "Barnronhart" wrote in message ... We sold our boat last year and now suffering withdrawls. I've been looking at the next one and like the looks of those ole Pachangas. What would be any faults or handling issues they may have? I'm thinking maybe a 27' with twin 350 mercs. Any hull problems? And why would such a good looking boat not still be manufactured by Sea Ray. Thanks |
#3
![]() |
|||
|
|||
![]()
Ive owned SeaRay's my whole life and I feel they are the best
constructed boats on the market. We've gone through many from a 17' open fisherman to a 36' cruiser with no problems what so ever. Maintence is key to keeping your boat running well and staying in good shape especially in salt-water. For example, I took a 1996 24'laguna, bought it for $8,900, restored the boat for about another $4-5,000 and turned around and sold it for $22,000 after using it for 2 years. SeaRay is known to be the "Cadillac" of boats for years. And as far as SeaRay using cheap parts, thats crazy, quality boats show quality prices if you know what I mean. Well, if anyone has any questions let me know. See-ya later and happy boating "Paul Nakamura" wrote in message ... I had an '89, beautiful boat in my opinion, but I'm afraid not constructed very well. I had cracks in the hull sides where the bulkheads were that cost me a lot of $$$ to fix. I also had my aluminum danforth style anchor stored in the well at the bow, the anchor dug a hole through the inner layer of glass and exposed a layer of "putty" used in the lay-up. (see yachtsurvey.com for a description of this stuff) This stuff was dry, but soft, you could dig it out with a screwdriver with no effort. Apparently a cheap way to core a mass produced piece of junk. SeaRay still uses this stuff as far as I know. I also had a couple of rattles that I could not chase down as well a loud crack every time I came off a wave hard. The ride was awful, Lake St Clair has a lot of boat chop, the Pachanga rattled your teeth the whole day long. If you are looking for something like that, I would look for a Wellcraft Nova II, much better constructed. Yes a good looking boat but I think they found that performance boaters are a little harder on their boats than cruisers. Paul . "Barnronhart" wrote in message ... We sold our boat last year and now suffering withdrawls. I've been looking at the next one and like the looks of those ole Pachangas. What would be any faults or handling issues they may have? I'm thinking maybe a 27' with twin 350 mercs. Any hull problems? And why would such a good looking boat not still be manufactured by Sea Ray. Thanks |
#4
![]() |
|||
|
|||
![]()
Mr Palka writes:
"Ive owned SeaRay's my whole life and I feel they are the best constructed boats on the market." That should be a clue as to what his opinion is worth. Paul .. "Palka" wrote in message om... Ive owned SeaRay's my whole life and I feel they are the best constructed boats on the market. We've gone through many from a 17' open fisherman to a 36' cruiser with no problems what so ever. Maintence is key to keeping your boat running well and staying in good shape especially in salt-water. For example, I took a 1996 24'laguna, bought it for $8,900, restored the boat for about another $4-5,000 and turned around and sold it for $22,000 after using it for 2 years. SeaRay is known to be the "Cadillac" of boats for years. And as far as SeaRay using cheap parts, thats crazy, quality boats show quality prices if you know what I mean. Well, if anyone has any questions let me know. See-ya later and happy boating "Paul Nakamura" wrote in message ... I had an '89, beautiful boat in my opinion, but I'm afraid not constructed very well. I had cracks in the hull sides where the bulkheads were that cost me a lot of $$$ to fix. I also had my aluminum danforth style anchor stored in the well at the bow, the anchor dug a hole through the inner layer of glass and exposed a layer of "putty" used in the lay-up. (see yachtsurvey.com for a description of this stuff) This stuff was dry, but soft, you could dig it out with a screwdriver with no effort. Apparently a cheap way to core a mass produced piece of junk. SeaRay still uses this stuff as far as I know. I also had a couple of rattles that I could not chase down as well a loud crack every time I came off a wave hard. The ride was awful, Lake St Clair has a lot of boat chop, the Pachanga rattled your teeth the whole day long. If you are looking for something like that, I would look for a Wellcraft Nova II, much better constructed. Yes a good looking boat but I think they found that performance boaters are a little harder on their boats than cruisers. Paul . "Barnronhart" wrote in message ... We sold our boat last year and now suffering withdrawls. I've been looking at the next one and like the looks of those ole Pachangas. What would be any faults or handling issues they may have? I'm thinking maybe a 27' with twin 350 mercs. Any hull problems? And why would such a good looking boat not still be manufactured by Sea Ray. Thanks |
#5
![]() |
|||
|
|||
![]()
The Pachanga was the epitome of the "floating Camaro" of it's day. They
were haphazardly assembled for the most part it seems, and sold on their outward appearance and some of SeaRay's laurels. My personal experience is associated with a particular Pachanga down on Oneida lake back in about 1989 or 1990 that separated at the seam coming down off of some chop at an angle. The cabin flooded and everything inside was soaked. Onlookers were in disbelief... as was the owner and the insurance company. If you want more input on this, call Peter Eaves at Great Lakes Boat Repair down in Sodus. He has repaired his share of Pachangas (so they could be sold, I'm sure). Rob * * * "Barnronhart" wrote in message ... We sold our boat last year and now suffering withdrawls. I've been looking at the next one and like the looks of those ole Pachangas. What would be any faults or handling issues they may have? I'm thinking maybe a 27' with twin 350 mercs. Any hull problems? And why would such a good looking boat not still be manufactured by Sea Ray. Thanks |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Hobie 18 trailer questions | General | |||
Depth Finder - Two questions | General |