Home |
Search |
Today's Posts |
#1
![]()
posted to rec.boats
|
|||
|
|||
![]() I'm wondering if I should have fast-acting or slow-acting fuses. Thoughts or links to relevent information much appreciated. Boat is 22'. Fuses are the glass type like on older autos. (AGC type??) Like this one: http://www.electronix.com/catalog/images/agc.jpg Fused electronics a ** Starter Solenoid ** Navagation lights ** Instruments & Depth Finder ** Cockpit / Courtesy Lights ** Manual Bilge Pump Switch ** 12-Volt Outlet ** Cabin Light ** From Generator / Regulator into the Electrical System ** Voltage Meter Note: Bilge Pumps have a float. Two batteries on boat and two pumps. Each pump has an always-on (not switched) line from one of the batteries. These have in-line fuses, not in the fuse panel. Thanks, Gary |
#2
![]()
posted to rec.boats
|
|||
|
|||
![]()
** Starter Solenoid
** Manual Bilge Pump Switch ** From Generator / Regulator into the Electrical System slow ** Navagation lights ** Instruments & Depth Finder ** Cockpit / Courtesy Lights ** 12-Volt Outlet ** Cabin Light ** Voltage Meter fast That's just my opinion... anything that carries a heavy load temporarily shouldbe a slow burn fuse; anything you want to "save" from damage should be fast (electronics, etc) if in doubt, use fast for everything and if it burns out quickly try slow; never go to higher amperage unless you're sure that the load warrants it. -j |
#3
![]()
posted to rec.boats
|
|||
|
|||
![]()
On Fri, 27 Jul 2007 15:35:35 -0400, "Gary"
wrote: I'm wondering if I should have fast-acting or slow-acting fuses. Thoughts or links to relevent information much appreciated. Boat is 22'. Fuses are the glass type like on older autos. (AGC type??) Like this one: http://www.electronix.com/catalog/images/agc.jpg Fused electronics a ** Starter Solenoid ** Navagation lights ** Instruments & Depth Finder ** Cockpit / Courtesy Lights ** Manual Bilge Pump Switch ** 12-Volt Outlet ** Cabin Light ** From Generator / Regulator into the Electrical System ** Voltage Meter Note: Bilge Pumps have a float. Two batteries on boat and two pumps. Each pump has an always-on (not switched) line from one of the batteries. These have in-line fuses, not in the fuse panel. First you have to understand the difference. Fast fuses do not have a "lag" time and are designed to protect circuits that can not stand overload for any length of time. Slow fuses do have a lag time and allow a small amount of overload to pass through until the current stabilizes. Now, to your question: ** Starter Solenoid Slow ** Navagation lights Slow ** Instruments & Depth Finder Fast ** Cockpit / Courtesy Lights Slow ** Manual Bilge Pump Switch Slow ** 12-Volt Outlet Slow ** Cabin Light Slow ** From Generator / Regulator into the Electrical System Slow ** Voltage Meter Fast It's ok to replace a slow fuse with a fast fuse, but not vice versa. With glass fuses, it helps diagnose a problem. For example if the glass is discolored after it blows, then the overload was large and you have a problem in the circuit. If the glass is clear with broken elements, it's a slow gradual overload. In either case, it needs to be investigated. |
#4
![]()
posted to rec.boats
|
|||
|
|||
![]() Thanks for Josh & ShortWave for the reply. "Gary" wrote in message reenews.net... I'm wondering if I should have fast-acting or slow-acting fuses. Thoughts or links to relevent information much appreciated. Boat is 22'. Fuses are the glass type like on older autos. (AGC type??) Like this one: http://www.electronix.com/catalog/images/agc.jpg Fused electronics a ** Starter Solenoid ** Navagation lights ** Instruments & Depth Finder ** Cockpit / Courtesy Lights ** Manual Bilge Pump Switch ** 12-Volt Outlet ** Cabin Light ** From Generator / Regulator into the Electrical System ** Voltage Meter Note: Bilge Pumps have a float. Two batteries on boat and two pumps. Each pump has an always-on (not switched) line from one of the batteries. These have in-line fuses, not in the fuse panel. Thanks, Gary |
#5
![]()
posted to rec.boats
|
|||
|
|||
![]()
On Jul 27, 3:35 pm, "Gary" wrote:
I'm wondering if I should have fast-acting or slow-acting fuses. OT: Years ago went into the local shop for fuses ... the sweetie behind the counter asked if I wanted a slow blow ... or fast. The males working there were rolling on the floor behind her laughing their guts out while I did my best to maintain a straight face replying ... slow, please. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
mercury outboard won't go full speed - then goes fast, then slow... | General | |||
Liberal acting above the law | ASA | |||
acting like a pro, getting a deal | Boat Building | |||
Too many people acting like your typical, mindless liberal | ASA | |||
Slow, slow, slow your boat.... | ASA |