re gear lube for Johnson 25hp 2 stroke outboard.

I was just at the marine supply store and asked about the 'Ultra HPF lube
recommended by the owners manual (that I downloaded)

The dealer salesman said 80% of the locals were using the Hi-Vis version and
he'd recommend I do same as it's cheaper.
He said if I started to use the synthetic, I should stay with it.
so.............. what were you using on this outboard?

BTW did you use a pump to feed the gear lube in...or did you just squeeze
the vinyl container?

Don

"Don White" wrote in message
...
re gear lube for Johnson 25hp 2 stroke outboard.

I was just at the marine supply store and asked about the 'Ultra HPF lube
recommended by the owners manual (that I downloaded)

The dealer salesman said 80% of the locals were using the Hi-Vis version
and he'd recommend I do same as it's cheaper.
He said if I started to use the synthetic, I should stay with it.
so.............. what were you using on this outboard?

BTW did you use a pump to feed the gear lube in...or did you just squeeze
the vinyl container?

Don



I think these are rather personal questions best discussed privately, Don.

"JoeSpareBedroom" wrote in message
...
"Don White" wrote in message
...
re gear lube for Johnson 25hp 2 stroke outboard.

I was just at the marine supply store and asked about the 'Ultra HPF
lube recommended by the owners manual (that I downloaded)

The dealer salesman said 80% of the locals were using the Hi-Vis version
and he'd recommend I do same as it's cheaper.
He said if I started to use the synthetic, I should stay with it.
so.............. what were you using on this outboard?

BTW did you use a pump to feed the gear lube in...or did you just
squeeze the vinyl container?

Don



I think these are rather personal questions best discussed privately, Don.

Tom doesn't always get my e-mails.. so I'll contact him whatever way I can.

"Don White" wrote in message
...

"JoeSpareBedroom" wrote in message
...
"Don White" wrote in message
...
re gear lube for Johnson 25hp 2 stroke outboard.

I was just at the marine supply store and asked about the 'Ultra HPF
lube recommended by the owners manual (that I downloaded)

The dealer salesman said 80% of the locals were using the Hi-Vis version
and he'd recommend I do same as it's cheaper.
He said if I started to use the synthetic, I should stay with it.
so.............. what were you using on this outboard?

BTW did you use a pump to feed the gear lube in...or did you just
squeeze the vinyl container?

Don



I think these are rather personal questions best discussed privately,
Don.

Tom doesn't always get my e-mails.. so I'll contact him whatever way I
can.

"JoeSpareBedroom" wrote in message
news
"Don White" wrote in message
...

"JoeSpareBedroom" wrote in message
...
"Don White" wrote in message
...
re gear lube for Johnson 25hp 2 stroke outboard.

I was just at the marine supply store and asked about the 'Ultra HPF
lube recommended by the owners manual (that I downloaded)

The dealer salesman said 80% of the locals were using the Hi-Vis
version and he'd recommend I do same as it's cheaper.
He said if I started to use the synthetic, I should stay with it.
so.............. what were you using on this outboard?

BTW did you use a pump to feed the gear lube in...or did you just
squeeze the vinyl container?

Don



I think these are rather personal questions best discussed privately,
Don.

Tom doesn't always get my e-mails.. so I'll contact him whatever way I
can.




Oh boy..I get it now!
I thought you were pullin' a Dingy Dan' on me. ;-)

"Don White" wrote in message
...

"JoeSpareBedroom" wrote in message
news
"Don White" wrote in message
...

"JoeSpareBedroom" wrote in message
...
"Don White" wrote in message
...
re gear lube for Johnson 25hp 2 stroke outboard.

I was just at the marine supply store and asked about the 'Ultra HPF
lube recommended by the owners manual (that I downloaded)

The dealer salesman said 80% of the locals were using the Hi-Vis
version and he'd recommend I do same as it's cheaper.
He said if I started to use the synthetic, I should stay with it.
so.............. what were you using on this outboard?

BTW did you use a pump to feed the gear lube in...or did you just
squeeze the vinyl container?

Don



I think these are rather personal questions best discussed privately,
Don.

Tom doesn't always get my e-mails.. so I'll contact him whatever way I
can.




Oh boy..I get it now!
I thought you were pullin' a Dingy Dan' on me. ;-)


I've been sitting here counting 1....2....3...738....when's Don gonna get
it?

On Mon, 15 Oct 2007 17:19:38 -0300, "Don White"
wrote:

re gear lube for Johnson 25hp 2 stroke outboard.

I was just at the marine supply store and asked about the 'Ultra HPF lube
recommended by the owners manual (that I downloaded)

The dealer salesman said 80% of the locals were using the Hi-Vis version and
he'd recommend I do same as it's cheaper.
He said if I started to use the synthetic, I should stay with it.
so.............. what were you using on this outboard?

I used the Ultra.

BTW did you use a pump to feed the gear lube in...or did you just squeeze
the vinyl container?

Loosen the top plug, but don't remove it.

Remove the bottom plug.

Let the oil drain.

Either pump or use a squeeze tube and refill the gear case. It's full
when there is oil coming out of the top plug.

Leave the pump or tube in the bottom hole and tighten the top plug.

Remove the pump or tube and replace the bottom plug. It's ok if a
little leaks out.

That's it.

Short Wave Sportfishing wrote:
On Mon, 15 Oct 2007 17:19:38 -0300, "Don White"
wrote:

re gear lube for Johnson 25hp 2 stroke outboard.

I was just at the marine supply store and asked about the 'Ultra HPF lube
recommended by the owners manual (that I downloaded)

The dealer salesman said 80% of the locals were using the Hi-Vis version and
he'd recommend I do same as it's cheaper.
He said if I started to use the synthetic, I should stay with it.
so.............. what were you using on this outboard?

I used the Ultra.

BTW did you use a pump to feed the gear lube in...or did you just squeeze
the vinyl container?

Loosen the top plug, but don't remove it.

Remove the bottom plug.

Let the oil drain.

Either pump or use a squeeze tube and refill the gear case. It's full
when there is oil coming out of the top plug.

Leave the pump or tube in the bottom hole and tighten the top plug.

Remove the pump or tube and replace the bottom plug. It's ok if a
little leaks out.

That's it.

jsut for curiosity sakes, I was wondering why you wouldn't remove the
top plug, besides its obviously un necessary?

just curious.

On Tue, 16 Oct 2007 19:32:05 -0000, Tim wrote:

jsut for curiosity sakes, I was wondering why you wouldn't remove the
top plug, besides its obviously un necessary?

Uh....

Yes?

"Short Wave Sportfishing" wrote in message
...
On Mon, 15 Oct 2007 17:19:38 -0300, "Don White"
wrote:

re gear lube for Johnson 25hp 2 stroke outboard.

I was just at the marine supply store and asked about the 'Ultra HPF lube
recommended by the owners manual (that I downloaded)

The dealer salesman said 80% of the locals were using the Hi-Vis version
and
he'd recommend I do same as it's cheaper.
He said if I started to use the synthetic, I should stay with it.
so.............. what were you using on this outboard?

I used the Ultra.

BTW did you use a pump to feed the gear lube in...or did you just squeeze
the vinyl container?

Loosen the top plug, but don't remove it.

Remove the bottom plug.

Let the oil drain.

Either pump or use a squeeze tube and refill the gear case. It's full
when there is oil coming out of the top plug.

Leave the pump or tube in the bottom hole and tighten the top plug.

Remove the pump or tube and replace the bottom plug. It's ok if a
little leaks out.

That's it.

Thanks Tom... Ultra HPF synthetic it is.........
I've done the job on smaller motors before... Just wasn't sure how hard it
would be to squeeze all 12 oz from the 16 oz container.
My old Seagull uses 140 weight gear oil so I have to find a supplier for
that.