Can be seen at yaimkool.com

This is a custom 16 foot plywood, fiberglass, epoxy composite hull.
Skin on frame with lots of floorspace, large seats serve as casting
decks, custom folding swim ladder.. I built this boat in 2005 and it
has been used two years in fresh water mostly.

The boat is now powered by a 1988 evinrude 25 horse, steering console,
and newer Johnson controls.. Great work boat, or river cruiser, great
gas mileage I will consider replacing the 25 horse with the newer 8
horse which moves the boat along fine at hull speed...

for info, contact Scotty at SmallBoats.com or email me at the
address I am posting from..

Thanks, Scotty from SmallBoats

wrote:
Can be seen at yaimkool.com

This is a custom 16 foot plywood, fiberglass, epoxy composite hull.
Skin on frame with lots of floorspace, large seats serve as casting
decks, custom folding swim ladder.. I built this boat in 2005 and it
has been used two years in fresh water mostly.

The boat is now powered by a 1988 evinrude 25 horse, steering console,
and newer Johnson controls.. Great work boat, or river cruiser, great
gas mileage I will consider replacing the 25 horse with the newer 8
horse which moves the boat along fine at hull speed...

for info, contact Scotty at SmallBoats.com or email me at the
address I am posting from..

Thanks, Scotty from SmallBoats



Nice feeeeeshing boat for protected water, for sure. I still like that
swim ladder.




--
I am only one, but I am one. I cannot do everything, but I can do
something. And because I cannot do everything, I will not refuse to do
the something that I can do. What I can do, I should do. And what I
should do, by the grace of God, I will do.

— Edward Everett Hale (1822-1909)

On Aug 19, 11:36*am, wrote:
Can be seen at yaimkool.com

This is a custom 16 foot plywood, fiberglass, epoxy composite hull.
Skin on frame with lots of floorspace, large seats serve as casting
decks, custom folding swim ladder.. I built this boat in 2005 and it
has been used two years in fresh water mostly.

The boat is now powered by a 1988 evinrude 25 horse, steering console,
and newer Johnson controls.. Great work boat, or river cruiser, great
gas mileage I will consider replacing the 25 horse with the newer 8
horse which moves the boat along fine at hull speed...

for info, contact Scotty at SmallBoats.com * or email me at the
address I am posting from..

Thanks, Scotty from SmallBoats

Why ya selling her?

wrote in message
...
On Aug 19, 11:36 am, wrote:
Can be seen at yaimkool.com

This is a custom 16 foot plywood, fiberglass, epoxy composite hull.
Skin on frame with lots of floorspace, large seats serve as casting
decks, custom folding swim ladder.. I built this boat in 2005 and it
has been used two years in fresh water mostly.

The boat is now powered by a 1988 evinrude 25 horse, steering console,
and newer Johnson controls.. Great work boat, or river cruiser, great
gas mileage I will consider replacing the 25 horse with the newer 8
horse which moves the boat along fine at hull speed...

for info, contact Scotty at SmallBoats.com or email me at the
address I am posting from..

Thanks, Scotty from SmallBoats

Why ya selling her?

Lining up for Tom's Ranger??

On Aug 19, 12:24*pm, wrote:
On Aug 19, 11:36*am, wrote:





Can be seen at yaimkool.com

This is a custom 16 foot plywood, fiberglass, epoxy composite hull.
Skin on frame with lots of floorspace, large seats serve as casting
decks, custom folding swim ladder.. I built this boat in 2005 and it
has been used two years in fresh water mostly.

The boat is now powered by a 1988 evinrude 25 horse, steering console,
and newer Johnson controls.. Great work boat, or river cruiser, great
gas mileage I will consider replacing the 25 horse with the newer 8
horse which moves the boat along fine at hull speed...

for info, contact Scotty at SmallBoats.com * or email me at the
address I am posting from..

Thanks, Scotty from SmallBoats

Why ya selling her?- Hide quoted text -

- Show quoted text -

Need to make room for cycle parts

On Tue, 19 Aug 2008 13:38:38 -0300, "Don White"
wrote:


wrote in message
...
On Aug 19, 11:36 am, wrote:
Can be seen at yaimkool.com

This is a custom 16 foot plywood, fiberglass, epoxy composite hull.
Skin on frame with lots of floorspace, large seats serve as casting
decks, custom folding swim ladder.. I built this boat in 2005 and it
has been used two years in fresh water mostly.

The boat is now powered by a 1988 evinrude 25 horse, steering console,
and newer Johnson controls.. Great work boat, or river cruiser, great
gas mileage I will consider replacing the 25 horse with the newer 8
horse which moves the boat along fine at hull speed...

for info, contact Scotty at SmallBoats.com or email me at the
address I am posting from..

Thanks, Scotty from SmallBoats

Why ya selling her?

Lining up for Tom's Ranger??


You gathering information for Harry's spread****?
--
** Good Day! **

John H

"John H." salmonremovebait@gmaildotcom wrote in message
...
On Tue, 19 Aug 2008 13:38:38 -0300, "Don White"
wrote:


wrote in message
...
On Aug 19, 11:36 am, wrote:
Can be seen at yaimkool.com

This is a custom 16 foot plywood, fiberglass, epoxy composite hull.
Skin on frame with lots of floorspace, large seats serve as casting
decks, custom folding swim ladder.. I built this boat in 2005 and it
has been used two years in fresh water mostly.

The boat is now powered by a 1988 evinrude 25 horse, steering console,
and newer Johnson controls.. Great work boat, or river cruiser, great
gas mileage I will consider replacing the 25 horse with the newer 8
horse which moves the boat along fine at hull speed...

for info, contact Scotty at SmallBoats.com or email me at the
address I am posting from..

Thanks, Scotty from SmallBoats

Why ya selling her?

Lining up for Tom's Ranger??


You gathering information for Harry's spread****?
--
** Good Day! **

John H

What's your problem JohnnyH.
Everytime you go away, you return uglier.

On Tue, 19 Aug 2008 17:37:00 -0300, "Don White"
wrote:


"John H." salmonremovebait@gmaildotcom wrote in message
.. .
On Tue, 19 Aug 2008 13:38:38 -0300, "Don White"
wrote:


wrote in message
...
On Aug 19, 11:36 am, wrote:
Can be seen at yaimkool.com

This is a custom 16 foot plywood, fiberglass, epoxy composite hull.
Skin on frame with lots of floorspace, large seats serve as casting
decks, custom folding swim ladder.. I built this boat in 2005 and it
has been used two years in fresh water mostly.

The boat is now powered by a 1988 evinrude 25 horse, steering console,
and newer Johnson controls.. Great work boat, or river cruiser, great
gas mileage I will consider replacing the 25 horse with the newer 8
horse which moves the boat along fine at hull speed...

for info, contact Scotty at SmallBoats.com or email me at the
address I am posting from..

Thanks, Scotty from SmallBoats

Why ya selling her?

Lining up for Tom's Ranger??


You gathering information for Harry's spread****?
--
** Good Day! **

John H

What's your problem JohnnyH.
Everytime you go away, you return uglier.


No problem at all, just a question.

Have you taken your mom out in that 11 month old boat yet? She'd probably
get a kick out of a little fishing.
--
** Good Day! **

John H

Don White wrote:
"John H." salmonremovebait@gmaildotcom wrote in message
...
On Tue, 19 Aug 2008 13:38:38 -0300, "Don White"
wrote:

wrote in message
...
On Aug 19, 11:36 am, wrote:
Can be seen at yaimkool.com

This is a custom 16 foot plywood, fiberglass, epoxy composite hull.
Skin on frame with lots of floorspace, large seats serve as casting
decks, custom folding swim ladder.. I built this boat in 2005 and it
has been used two years in fresh water mostly.

The boat is now powered by a 1988 evinrude 25 horse, steering console,
and newer Johnson controls.. Great work boat, or river cruiser, great
gas mileage I will consider replacing the 25 horse with the newer 8
horse which moves the boat along fine at hull speed...

for info, contact Scotty at SmallBoats.com or email me at the
address I am posting from..

Thanks, Scotty from SmallBoats
Why ya selling her?

Lining up for Tom's Ranger??

You gathering information for Harry's spread****?
--
** Good Day! **

John H

What's your problem JohnnyH.
Everytime you go away, you return uglier.




Hehehe. He's getting older and more incontinent.

"John H." salmonremovebait@gmaildotcom wrote in message
...
On Tue, 19 Aug 2008 17:37:00 -0300, "Don White"
wrote:


"John H." salmonremovebait@gmaildotcom wrote in message
. ..
On Tue, 19 Aug 2008 13:38:38 -0300, "Don White"
wrote:


wrote in message
...
On Aug 19, 11:36 am, wrote:
Can be seen at yaimkool.com

This is a custom 16 foot plywood, fiberglass, epoxy composite hull.
Skin on frame with lots of floorspace, large seats serve as casting
decks, custom folding swim ladder.. I built this boat in 2005 and it
has been used two years in fresh water mostly.

The boat is now powered by a 1988 evinrude 25 horse, steering console,
and newer Johnson controls.. Great work boat, or river cruiser, great
gas mileage I will consider replacing the 25 horse with the newer 8
horse which moves the boat along fine at hull speed...

for info, contact Scotty at SmallBoats.com or email me at the
address I am posting from..

Thanks, Scotty from SmallBoats

Why ya selling her?

Lining up for Tom's Ranger??


You gathering information for Harry's spread****?
--
** Good Day! **

John H

What's your problem JohnnyH.
Everytime you go away, you return uglier.


No problem at all, just a question.

Have you taken your mom out in that 11 month old boat yet? She'd probably
get a kick out of a little fishing.
--
** Good Day! **

John H


So... your regressing to harassing my 93 year old mother again!
Why don't you take yours out on your boat?