Hi All -

1977 Chriscraft powerboat seeks new home .
Has an OK engine that needs to be installed, needs lots of cosmetics.

Length is 20.5 ft, solid fiberglass hull, controls in the center, but on
the right, set up to take a chevy 350 gas engine and has a volvo penta
280 outdrive. It may be a 'sportsman' but the only pics of that model
I've seen so far are different. Condition is as follows : original chevy
305 engine has some sal****er damage, I bought a 350 for it and haven't
had time to install the engine. So its a hull w/ outdrive and 2 engines
only one of which you'll need , all the parts for both engines go with.
It'll be good for a shade tree mechanic who has time to play with it.
Trailer is strong and probably worth the more than $300 by itself.
Trailer will need some kind of temp tags and temp lights to travel.
Probably needs a fullsized pick up to tow it, too heavy for a small car
or light truck.
location is Annapolis Md. might give it away if nobody offers $300,
you can send email to get on the giveaway list.

Many pictures and more detailed info :
http://mywebpages.comcast.net/tomato...oat/boat2.html

Also - a crane/hoist for the engine/s, $75 but only after the boat is
gone. 12 ft A-frame with a winch.

try 2 with the word ' in ' in the title..



----------------------------------------------------------------------
rec.boats.marketplace is a moderated newsgroup. See rules and legal
disclaimer at http://www.algebra.com/rbm


----------------------------------------------------------------------
rec.boats.marketplace is a moderated newsgroup. See rules and legal
disclaimer at http://www.algebra.com/rbm

Hi All -

I'm getting rid of a 12' tall engine crane/hoist, tall enough to take an
engine out of a boat on a trailer. Was used to lift a marine 350 with
all the attachments in and out of a Chriscraft a few times . No problem
with what I'd guess was/is between 500 and 600 pounds.

Its a 12 ft A-frame made of PT wood with a winch and tackle.
Probably needs a fullsized pick up to move it, too bulky for a small
car. location is Annapolis Md. Asking what the wood cost me in June,
$80. So more or less you get a free winch for the effort of moving it.

See a picture
http://mywebpages.comcast.net/tomato...t_engine_f.jpg





----------------------------------------------------------------------
rec.boats.marketplace is a moderated newsgroup. See rules and legal
disclaimer at http://www.algebra.com/rbm